We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Equipped with a test frequency of up to 1MHz and a 0.08% high measurement accuracy, the LCR-8201 from GW Instek is part of the new LCR-8200 series of high precision LCR meters. The wide 7” color display shows measurement results numerically or graphically, allowing for easy interpretation of characteristics for the DUT. A complete range of standard interfaces like USB device, RS-232C, handler and GPIB provide users with the utmost in versatility. The USB storage function when operating in the graphics mode, saves measured characteristic curves and values of the DUT for later analysis. The list of useful features and functions render the LCR-8201 perfect for test requirements of passive components in engineering, R&D and production.
MODEL | LCR-8230 | LCR-8220 | LCR-8210 | LCR-8205 | LCR-8201 |
TEST FREQUENCY | |||||
DC, 10Hz~30MHz; 6 Digits, ±0.0007% | DC, 10Hz~20MHz; 6 Digits, ±0.0007% | DC, 10Hz~10MHz; 6 Digits, ±0.0007% | DC, 10Hz~5MHz; 6 Digits, ±0.0007% | DC,10Hz~1MHz; 6 Digits, ±0.0007% | |
OUTPUT IMPEDANCE | |||||
25Ω / 100Ω SELECTABLE | |||||
BASIC ACCURACY | |||||
±0.08% | |||||
TEST SPEED | |||||
MAX: 25ms(>10kHz), FAST: 50ms(>20Hz), MEDIUM: 100ms SLOW: 300ms, SLOW2: 600ms | |||||
TEST SIGNAL LEVEL | |||||
AC Voltage: | 10mV ~ 2Vrms (FREQ. ≦1MHz), 10mV ~ 1Vrms (FREQ. > 1MHz or FREQ. ≦1MHz and RO=25Ω) | ||||
AC Current: | 100μA ~ 20mArms (RO=100Ω), 200μA ~ 40mArms (RO=25Ω) | ||||
DCR Voltage: | 1Vdc (40mA max.) | ||||
MEASUREMENT PARAMETERS | |||||
Maximum four parameterscan be measured and displayed at the same time Impedance (Z), Inductance (Ls / Lp), Capacitance (Cs / Cp), AC Resistance (Rs / Rp), Quality Factor (Q), Dissipation Factor (D), Admittance (Y), Conductance (G), Reactance (X), Phase Angle (θd / θr), Susceptance (B), DC Resistance (Rdc) | |||||
LIST MEASUREMENT | |||||
Listed Steps: | 15 | ||||
Listed Parameters: | Freq/Vac/Iac/DC Bias/Comp/BIN | ||||
Trigger: | AUTO, REPEAT, SINGLE | ||||
SWEEP MEASUREMENT | |||||
Swept Graphical: | Two of measurement parameters | ||||
Swept Parameters: | Freq/Vac/Iac, Keep Trace | ||||
OTHER FUNCTIONS | |||||
Auto Level Control (ALC): | Standard | ||||
DC Bias: | 0~±12V | ||||
Handler: | PASS, FAIL and OK, NG or BIN 1-9 | ||||
OTHER FEATURES | |||||
Correction: | Open/Short/HF Load/Load | ||||
V/I Monitor: | Vac, Iac, Vdc, Idc | ||||
Comparator: | Value, Δ, Δ% | ||||
Buzzer: | OFF, Pass, Fail | ||||
Average: | 1 to 64 | ||||
GENERAL | |||||
DISPLAY | 7" LCD color display (800x480) | ||||
INTERFACE | USB/GPIB/LAN/RS-232/Handler/USB Host/TRIGGER Input | ||||
POWER SOURCE | AC 100V~240V, 50/60Hz; Consumption: 65VA (max.) | ||||
DIMENSIONS & WEIGHT | 346 (W) X 145 (H) X 335 (D)mm; Approx. 3.3kg |