We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The GW Instek LCR-8210 10MHz High-Precision LCR Meter is part of the innovative LCR-8200 series of high frequency meters. The LCR-8210 is constructed for a test frequency of up to 10 MHz and offers a 0.08% high measurement accuracy. Measurement results can be shown numerically or graphically on the vast 7” color display, making interpretations of the characteristics of the DUT virtually effortless. The unit is built with a wide range of standard interfaces like USB device, RS-232C, handler and GPIB, all of which allow for control of the instrument via the most familiar interface. The USB storage function when operating in the graphics mode, saves measured characteristic curves and values of the DUT for later analysis. The list of useful features and functions deem the LCR-8210 perfect for test requirements of passive components in R&D, production and engineering.
MODEL | LCR-8230 | LCR-8220 | LCR-8210 | LCR-8205 | LCR-8201 |
TEST FREQUENCY | |||||
DC, 10Hz~30MHz; 6 Digits, ±0.0007% | DC, 10Hz~20MHz; 6 Digits, ±0.0007% | DC, 10Hz~10MHz; 6 Digits, ±0.0007% | DC, 10Hz~5MHz; 6 Digits, ±0.0007% | DC,10Hz~1MHz; 6 Digits, ±0.0007% | |
OUTPUT IMPEDANCE | |||||
25Ω / 100Ω SELECTABLE | |||||
BASIC ACCURACY | |||||
±0.08% | |||||
TEST SPEED | |||||
MAX: 25ms(>10kHz), FAST: 50ms(>20Hz), MEDIUM: 100ms SLOW: 300ms, SLOW2: 600ms | |||||
TEST SIGNAL LEVEL | |||||
AC Voltage: | 10mV ~ 2Vrms (FREQ. ≦1MHz), 10mV ~ 1Vrms (FREQ. > 1MHz or FREQ. ≦1MHz and RO=25Ω) | ||||
AC Current: | 100μA ~ 20mArms (RO=100Ω), 200μA ~ 40mArms (RO=25Ω) | ||||
DCR Voltage: | 1Vdc (40mA max.) | ||||
MEASUREMENT PARAMETERS | |||||
Maximum four parameterscan be measured and displayed at the same time Impedance (Z), Inductance (Ls / Lp), Capacitance (Cs / Cp), AC Resistance (Rs / Rp), Quality Factor (Q), Dissipation Factor (D), Admittance (Y), Conductance (G), Reactance (X), Phase Angle (θd / θr), Susceptance (B), DC Resistance (Rdc) | |||||
LIST MEASUREMENT | |||||
Listed Steps: | 15 | ||||
Listed Parameters: | Freq/Vac/Iac/DC Bias/Comp/BIN | ||||
Trigger: | AUTO, REPEAT, SINGLE | ||||
SWEEP MEASUREMENT | |||||
Swept Graphical: | Two of measurement parameters | ||||
Swept Parameters: | Freq/Vac/Iac, Keep Trace | ||||
OTHER FUNCTIONS | |||||
Auto Level Control (ALC): | Standard | ||||
DC Bias: | 0~±12V | ||||
Handler: | PASS, FAIL and OK, NG or BIN 1-9 | ||||
OTHER FEATURES | |||||
Correction: | Open/Short/HF Load/Load | ||||
V/I Monitor: | Vac, Iac, Vdc, Idc | ||||
Comparator: | Value, Δ, Δ% | ||||
Buzzer: | OFF, Pass, Fail | ||||
Average: | 1 to 64 | ||||
GENERAL | |||||
DISPLAY | 7" LCD color display (800x480) | ||||
INTERFACE | USB/GPIB/LAN/RS-232/Handler/USB Host/TRIGGER Input | ||||
POWER SOURCE | AC 100V~240V, 50/60Hz; Consumption: 65VA (max.) | ||||
DIMENSIONS & WEIGHT | 346 (W) X 145 (H) X 335 (D)mm; Approx. 3.3kg |
Write Your Own Review