We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
ACCURACY
16 psiA Range | ||
-S5 Option | ± (0.05% of Full Scale) -10 to 50° C | Includes all effects of linearity, hysteresis, repeatability, temperature, and stability for one year. Easily switch between gauge (sealed gauge) and absolute pressure measurement. Only available with -S5 accuracy option. Calibrated in Vertical Orientation. Orientation Effect = ± 0.004 psi. |
100 psiA Range | ||
0 to 20% of Range | ±(0.02% of Full Scale) | Includes all effects of linearity, hysteresis, repeatability, temperature, and stability for one year. |
20% to 110% of Range | ±(0.1% of Reading) | Easily switch between gauge (sealed gauge) and absolute pressure measurement. |
-S2 Option | ± (0.02% of Full Scale) 15 to 25° C ± (0.05% of Full Scale) -10 to 15° C, 25 to 50° C, typical | |
-S5 Option | ± (0.05% of Full Scale) -10 to 50° C | |
500, 1000, 2000, 3000, 5000, 10 000, 15 000 psiA Ranges | ||
15 psiA to 20% of Range | ±(0.02% of Full Scale) | Includes all effects of linearity, hysteresis, repeatability, temperature, and stability for one year. |
20% to 110% of Range | ±(0.1% of Reading) | All models indicate pressure from 0 psiA to Full Scale, but are only specified from 15 psiA to Full Scale. |
-S2 Option | ± (0.02% of Full Scale) 15 to 25° C ± (0.05% of Full Scale) -10 to 15° C, 25 to 50° C, typical | |
-S5 Option | ± (0.05% of Full Scale) -10 to 50° C | Easily switch between gauge (sealed gauge) and absolute pressure measurement. |
OPERATING TEMPERATURE
Temperature Range | -10 to 50° C (14 to 122° F) | Non-condensing. No change in accuracy over operating |
DISPLAY
Screen | 5.5 digits | LCD readable in sunlight with bright backlight. |
Single Line Display | 16.9 mm (0.67") high | PSV mode is intended for Pressure Safety Valve testing, and requires software to enable. |
Dual Line Display | Main Display: 13.9 mm (0.55") | |
Display Rate | 4 readings/second (standard) |
POWER
The XP2i is Intrinsically Safe only if powered by one of the following battery types.
ATEX/IECEx | Approved Battery Type | Ta= | Marking |
Rayovac Max Plus 815 | -20 to 50° C | Ex ia IIC T4 Ga | |
Energizer E91 | |||
Energizer EN91 | -20 to 50° C | Ex ia IIC T3 Ga | |
Duracell MN1500 |
CSA | Approved Battery Type | Ta= | Marking |
Rayovac Max Plus 815 | -20 to 45° C | Class I, Division 1, A, B, C, D T4 | |
Energizer E91 | -20 to 50° C | Class I, Division 1, A, B, C, D T3C | |
Energizer EN91 | |||
Rayovac Max Plus 815 |
3 x AA | 1500 hours, typical | Uses 3 alkaline AA (LR6) batteries. Use of backlight and/or RS232 reduces operating time. |
Optional AC power supply available. Do not use AC power supply in hazardous locations. | ||
Ultra Low Power | > 1 year, typical** | ** 20 minute recording interval or greater in LT5 mode. |
DATA/COMMUNICATION
Digital Interface | RS232, DB-9F | For hazardous location product warnings, refer to the |
DATALOGGING
Capacity | 32 000 data points | DataLoggerXP Firmware Update may be purchased at time of order, or in an Upgrade Package later. |
Storage Type | Non-volatile flash memory | Software available for download from our website. |
Minimum Interval | 1 second | Compatible with 32 & 64 bit Windows 7, Vista, and XP (32 bit only). |
Maximum Interval | 18 hours | Produces csv files, or uses Excel template files (samples included) to automatically format and graph data. |
Min. Event Duration | 250 mS*** | *** Logging Type - Average with Peaks. |
„„ENCLOSURE
Weight | 562 g (19.8 oz) | Weight includes batteries. |
Rating | IP66 and IP67 | Submersible to 1 m for 30 minutes [IEC 60529]. |
Housing | Diecast aluminum | Nickel plating over low copper, marine grade aluminum. |
Keypad and Labels | UV Resistant Polyester | LCD protected from impact damage by 1.5 mm (0.06") thick polycarbonate lens under polyester window. |
|
| Skydrol compatible. |
SENSOR
Wetted Materials | (wrench tight) 316 stainless steel | All welded, with a permanently filled diaphragm seal. |
| (finger tight) 316 stainless steel and Viton® (internal o-ring) | Metal to metal cone seal; O-ring can be removed if necessary. |
Diaphragm Seal Fluid | Silicone Oil | Optional connection on back. |
Connection | Crystal CPF Female | 1/4" male NPT adapter included unless BSP, M20, or 15KPSIB is specified. |
|
| 1/4" medium pressure tube system compatible with HiP LM4 and LF4 Series, Autoclave Engr SF250CX Male and Female Series. |
STORAGE TEMPERATURE
Temperature Range | -40 to 75°C (-40 to 167°F) | Batteries should be removed if stored for more than one month. |
SPECIAL FEATURES
The following requires the use of our free ConfigXP software.
User Defined Unit | Allows the user to define and display any pressure units not included, |
PSV Mode | Intended for pressure safety valve / burst disk testing. 8 readings per second. |
Averaging | Smooths unsteady readings (1 to 10 samples). |
Remove | Unwanted pressure units from Units button. |
Disable | Peak pressure button. |
Limit or Disable | Zero button. |
Password Protect | Changes to configuration or calibration factor(s). |
Save | Configuration to a file. |
Copy | Configuration can be copied to other gauges. |
Optional Pressure Pump Systems
A includes System A (pneumatic) 0 to 30 psi | |
AH includes System A (pneumatic) 0 to 580 psi | |
B includes System B (pneumatic) -25 inHg to 30 psi | |
BHincludes System B (pneumatic) -25 inHg to 580 psi | |
C includes System C (oil) 0 to 3,000 psi | |
CH includes System C (oil) 0 to 5,000 psi | |
DO includes System D (oil) 0 to 5,000 psi | |
DW includes System D (water) 0 to 5,000 psi | |
EOincludes System E (oil) 0 to 10,000 psi | |
FOVincludes System F (oil) 0 to 15,000 psi | |
FWVincludes System F (water) 0 to 15,000 psi | |
GOincludes System G (oil) 0 to 15,000 psi | |
GWincludes System G (water) 0 to 15,000 psi | |
HOincludes System H (oil/pneumatic) -25 inHg to 580 psi and 0 to 5,000 psi |
*Not recommended for oxygen service
- Field gauge calibration
- Permanent outdoor installation
- Burst disc testing
- Pressure safety valve (PSV) testing
- Hydraulic torque wrench indication
- Torque datalogging
- Pressure regulator testing
- Pipeline static pressure testing
- Chart recorder replacement
- Wellhead monitoring
- Filter performance testing
- Hydrostatic leak testing