We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The BK Precision RFM3002-GPIB has the same features as the RFM3002 but includes a GPIB interface. The RFM3002-GPIB can be combined with the RFP3000 Series RF peak power sensors to extend their capabilities and eliminate the need for a remote computer.
RFP3000 Series Sold Separately. Click on one of the model #'s below to view the product:
| Sensor | RFP3006 | RFP3008 | RFP3018 | RFP3118 | RFP3040 | RFP3140 |
RF Frequency Range | 50 MHz to 6 GHz | 50 MHz to 8 GHz | 50 MHz to 18 GHz | 50 MHz to 18 GHz | 50 MHz to 40 GHz | 50 MHz to 40 GHz |
Video Bandwidth (high/std) | 195 MHz / 350 kHz | 165 MHz / 350 kHz | 70 MHz / 350 kHz | 6 MHz / 350 kHz | 70 MHz / 350 kHz | 6 MHz / 350 kHz |
RFM3000 Series | |
Channels | 2 or 4 channels |
Display | |
Display Size | 5-inch WVGA multi-touch display with intuitive graphical user interface |
Display Modes | Graph (power vs time) - Numeric (numeric data) - Statistical measurements - CCDF |
Automatic measurements (pulse, statistical, and marker measurements) | |
Marker Measurements (in Graph view) | |
Markers (vertical cursors) | Settable in time relative to the trigger position |
Marker Independently | Avg, Min and Max Power at a specified time offset |
Interval Between Markers | Avg, Min and Max Power over the defined interval |
Pair of Markers | Ratio of power values at each marker |
Pulse Mode | |
Automatic Measurements | Pulse rise-time - Pulse fall-time - Pulse width - Pulse off-time - Pulse period - Pulse repetition frequency Pulse duty cycle - Waveform average - Pulse peak - Pulse average - Pulse overshoot - Pulse droop Top level power - Bottom level power - Edge delay - Pulse edge skew between channels |
Statistical Mode | |
Automatic Measurements | Peak power - Average power - Minimum power - Peak to average ratio - Dynamic range Percent at cursor - Crest factor at cursor - Crest factor at various percents |
Trigger | |
Synchronization | Internal trig distribution |
Mode | Normal, Auto, Auto Pk-to-Pk, Free Run |
Source | Any connected RTP Series sensor (via SMB’s) or rear panel external trigger |
Internal Level Range | -40 dBm to +20 dBm (sensor dependent) |
External Level Range | ± 5 volts or TTL |
Slope | + or - |
Hold-off, Min Pulse Width, Max Trigger Rate | Sensor and timebase dependent |
Time Base | |
Time Base Resolution, Range, Accuracy | Sensor dependent |
Time Base Display | Sweeping or roll mode |
Trigger Delay Range | Sensor dependent |
Trigger Delay Resolution | 0.02 divisions |
Note: All specifications apply to the unit after a temperature stabilization time of 15 minutes over an ambient temperature range of 23 °C ± 5 °C. Specifications are valid for single unit operation only.
RFM3000 Series | ||
Inputs/Outputs (front panel) | ||
USB with SMB trigger port | 4 ports USB2.0: Type A receptacle, 4 ports SMB(f) | |
Test Source (optional rear panel placement) |
|
|
Inputs/Outputs (rear panel) | ||
LAN | 10/100 Ethernet: RJ-45 modular socket | |
USB with SMB trigger port | 4 ports USB2.0: Type A receptacle, 4 ports SMB(f) | |
Multi I/O Connector | User Selectable | Status, trigger, or voltage output |
Range | 0 to 10 V (Analog unipolar) | |
-10 V to +10 V (Analog bipolar) | ||
0 or 5 V (Logic) | ||
Accuracy | ±200 mV (±100 mV typical) | |
Linearity | 0.4% typical | |
Remote Control | ||
Command Set | SCPI-1999.0 | |
LAN | Ethernet: 10/100/1000 BaseT; HiSLIP | |
GPIB | Optional | |
Regulatory Compliance | ||
CE compliance with the following European Union directives | Low Voltage Directive: 2014/35/EU, RoHS Directive: 2011/65/EU, WEEE Directive 2012/19/EU, Electromagnetic Compatibility Directive (EMC): 2014/30/EU and Environmental: MIL-PRF-28800F, Class 3 | |
General | ||
Power Requirements | 90 to 260 VAC, 47 to 60 Hz; 90 to 135 VAC, 47 to 400 Hz; 30 W (35 VA) max | |
Operating Temperature | 0 to 50 °C (32 to 122 °F) | |
Storage Temperature | -40 to +70 °C (-40 to 158 °F) | |
Humidity | 95% maximum, non-condensing | |
Altitude Operation | up to 15,000 feet (4600 m) | |
Shock Withstands | ± 30 G, 11 ms impulse in X, Y, and Z axes | |
Vibration Withstands | 2 G sine, 5 to 55 Hz; 2 G random, 5 to 500 Hz | |
Warranty | 3 Years | |
Dimensions (excluding connectors) | 3.5" x 8.3" x 11.2" (89 x 211 x 284 mm) | |
Weight | 4.8 lbs (2.2 kg) | |
Included Accessories | Power cord | |
Write Your Own Review
