We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The Texmate UM-35-SG is a cost-effective meter that measure 4 wire pressure transducers, strain gauges and load cells. This meter has two header selectable transducer output ranges of 2mV/V and 20mV/V. The UM-35-SG comes standard with a red 3 1/2 digit LED display or you can choose an optional green or super bright LED display.
Input Configuration | Differential |
Full Scale Ranges | Accepts inputs from 2mV/V or 20mV/V transducers |
Excitation | 5V or 10V DC. Ratiometrically compensated to operate with all transducer output ranges. |
A/D Converter | 12 Bit Dual Slope |
Accuracy | ±(0.05% of reading + 2 counts) |
Temperature Coefficient | 100 ppm/°C (Typical) |
Warm Up Time | 2 minutes to specified accuracy |
Conversion Rate | 3 conversions per second (Typical) |
Display | 3 1/2 digit 0.56" Red LED display (std), Green or Super Bright Red are optional. Range 0 to 1999 counts. |
Decimal Selection | Header under face plate, X•X•X•X• |
Over-range Indication | 1 (MSD) displayed all other digits blank |
Power Supply (std) | 120/240V AC, 50/60/400 Hz. approx 1.5W. |
(Optn) VO-DC/ISO | Isolated Switcher. 9 to 36V DC/12 to 24V AC |
Operating Temperature | -10 to 50 °C |
Storage Temperature | -20 to 70 °C |
Relative Humidity | 95% (non-condensing) |
Case Dimensions | Bezel 3.78”Wx1.89”H (96mm x 48mm) Depth behind bezel 3.36" (83.5mm) Plus 0.5 to .9” (12.7 to 22.8mm) depending on connector used. |
Weight | NW. 12oz (0.34kg) 15.6oz (0.44kg). when packed. |
Manuals
Write Your Own Review