We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The Reed Instruments R5055-KIT includes the R5055 True RMS clamp meter that is capable of measuring up to 1000V and 1000A in both AC/DC modes. The R5055-KIT also includes the R5065 current probe that has an 18" jaw opening with 39'' cable length and provides measurement flexibility up to 3000A AC.
R5055 AC/DC Clamp Meter
| AC/DC Current | |
| Range | 60, 600, 1000A |
| Accuracy | AC/DC: ±(2% rdg. +5 dgt.) |
| Resolution | 0.01, 0.1, 1A |
| AC/DC Voltage | |
| Range | AC: 6, 60, 600, 1000V DC: 600mV, 6, 60, 600, 1000V |
| Accuracy | AC: ±(1.0% rdg. +8 dgt.) DC: ±(0.5% rdg. +5 dgt.) |
| Resolution | 0.1mV, 0.001V, 0.01V, 0.1V, 1V |
| Resistance | |
| Range | 600Ω, 6, 60, 600kΩ, 6, 60MΩ |
| Accuracy | ±(1% rdg. +2 dgt.) |
| Resolution | 0.1Ω, 0.001kΩ, 0.01kΩ, 0.1kΩ, 0.001MΩ, 0.01MΩ |
| Capacitance | |
| Range | 60, 600.0nF, 6, 60, 600μF, 6, 60mF |
| Accuracy | ±(4.0% + 5) |
| Resolution | 0.01nF, 0.1nF, 0.001μF, 0.01μF, 0.1μF, 0.001mF, 0.01mF |
| Frequency | |
| Range | 10Hz, 1MHz |
| Accuracy | ±(0.1% rdg. +3 dgt.) |
| Resolution | 0.01Hz, 1kHz |
| Low Pass Filter (LPF) AC Voltage | |
| Range | 600, 1000V |
| Accuracy | ±(2% rdg. +5 dgt.) |
| Resolution | 0.1, 1V |
| Low Impedance (LoZ) AC Voltage | |
| Range | 600, 1000V |
| Accuracy | ±(2% rdg. +5 dgt.) |
| Resolution | 0.1, 1V |
| Temperature | |
| Range | -40 to 1832°F (-40 to 1000°C) |
| Accuracy | ±(1.0% rdg. + 4°F) ±(1.0% rdg. + 2°C) |
| Resolution | 1°F, 1°C |
| General Specifications | |
| Range Selection | Autoranging/Manual |
| Low Impedance (LoZ) | Yes |
| Low Pass Filter (LPF) | Yes |
| True RMS | Yes |
| Display | 6000 count LCD display |
| Display Hold | Yes |
| Max/Min | Yes |
| Peak Hold | N/A |
| Zero Push Button Adjustment | Yes |
| Relative Mode | Yes |
| Diode Test | Yes |
| Backlit Display | Yes |
| Analog Bargraph | Yes (31-segment) |
| Continuity Check | Audible signal if resistance ≤30Ω |
| Duty Cycle | Yes |
| Non-Contact Voltage Detector | Yes |
| Built-In Flashlight | Yes |
| Kick Stand | N/A |
| Autoshut Off | Yes (after 15 mins) |
| Flexible Current Probe (optional) | Yes (R5065, Extends to 3000A) |
| Power Supply | 3 x AAA batteries |
| Low Battery Indicator | Yes |
| Jaw Opening | 1.7" (42mm), up to 1500 MCM |
| Overvoltage Category | CAT. III 1000V, CAT. IV 600V |
| Product Certifications | CE, ETL |
| Operating Temperature | 32 to 122°F (0 to 50°C) |
| Storage Temperature | 14 to 140°F (-10 to 60°C) |
| Dimensions | 10.7 x 3.2 x 1.7" (272 x 81 x 43.5mm) |
| Weight | 15.8oz (447g) |
R5065 Flexible 18" Current Probe
| AC/DC Current | |
| Range | 30, 300, 3000A |
| Accuracy | AC: ±(3% rdg. +5 dgt.) |
| Resolution | 0.1, 1, 10A |
| General Specifications | |
| Power Supply | 3 x AAA batteries |
| Low Battery Indicator | Yes |
| Jaw Opening | 18" (457.2mm) |
| Cable Length | 39" (991mm) |
| Overvoltage Category | CAT. IV 600V |
| Product Certifications | CE, ETL |
| Operating Temperature | 32 to 122°F (0 to 50°C) |
| Storage Temperature | -4 to 140°F (-20 to 60°C) |
| Dimensions | 10.5 x 4.7 x 1.3" (267 x 119.4 x 34mm) |
| Weight | 9.2oz (260g) |
Write Your Own Review
- • Industrial maintenance teams performing scheduled and preventative maintenance on electro-mechanical equipment and systems
- • Facilities, building maintenance and electricians looking to troubleshoot electrical equipment installation problems
