Fluke Calibration P3830 30000 PSIG Hydraulic Deadweight Tester

Pressure Range

500 to 30,000 psi

40 to 2,000 bar

4 to 200 MPa

40 to 2000 kgf/cm²

Accuracy

Accuracy*

Standard accuracy is 0.02% of Reading¹

*Accuracy is based on % of Reading from 10% to 100% of the piston range when used in accordance with the corrections found on the calibration certificate. Below 10%, ± (accuracy class) x 10% of the piston range.

Materials of Construction

Standard weight material

Series 3 non-magnetic, austenitic, stainless steel

Weight density

7.8 g/cm³

Piston material

Tungsten carbide with nickel binder

Cylinder material

Tungsten carbide with cobalt binder

Thermal coefficient of expansion

11 ppm/°C

General

Test port adapters

9/16 – 18 UNF (Autoclave); 3/8 BSP; 1/2 BSP and 3/4 BSP

Instrument weight

66 lbs. (30 Kg) Instrument Base only

Instrument size

18 x 13.5 x 19 in (455 x 340 x 478 mm)

Reservoir volume

235 cc (14.3 in³)

Intensifier ratio

7 to 1

Seal materials

Nitrile

Operating fluid

Dioctyl Sebacate (DOS), our reference 55-600

Options

Presscal software

Windows based software program that allows users to easily apply all necessary corrections to enhance the deadweight tester performance. Supports additional 12 pressure units (bar, mbar, MPa, kPa, psi, kg/cm², atm, inH₂O, mH₂O, mmH₂O, inHg, mmHg).

Conversion weight sets

For applications that require nominal pressure increments in measurement units different than the main unit, conversion weight sets are available. Available measurement units are: psi, bar kgf/cm² or MPa.