We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Whether you’re using in-line or handheld infrared pyrometers, you need good calibration standards to verify their accuracy. Our portable IR calibrators provide stable blackbody targets for calibrating noncontact IR thermometers from –30°C to 500°C.
These units feature a temperature controlled measurement surface with a diameter of 2.25" (57 mm). The target temperature can be controlled in set-point increments of 0.1° from –30°C to 500°C and a well is located directly behind the blackbody surface for contact calibration.
If you’re calibrating IR guns at cold temperatures, you’ll love our new 9133. With solid-state cooling technology, this new IR calibrator reaches –30°C (22°F) in normal ambient conditions. With a conveniently located dry gas fitting on the front bezel, ice build up on the target can be avoided. At the upper end of its range, the 9133 provides stable temperatures to 160°C (320°F).
With heating and cooling times of about 15 minutes from ambient to either extreme, the 9133 gets you to temperature quickly and performs when it gets there.
Specifications | ||
Temperature range | –30 °C to 150 °C at 23 °C ambient (–22 °F to 302 °F at 73 °F ambient) | |
Accuracy | ± 0.4 °C (± 0.72 °F) | |
Stability | ± 0.1 °C (± 0.18 °F) | |
Target size | 57 mm (2.25 in) | |
Target emissivity | 0.95 (± 0.02 from 8 to 14 mm) | |
Resolution | 0.1 ° | |
Heating time | 15 minutes (25 °C to 150 °C) | |
Cooling time | 15 minutes (25 °C to –20 °C) | |
Computer interface | RS-232 I/O included with 9930 Interface-it software | |
Power | 115 V ac (± 10 %), 1.5 A, or 230 V ac (± 10 %), 1.0 A, switchable, 50/60 Hz, 200 W | |
Size (HxWxD) | 152 x 286 x 267 mm (6 x 11.25 x 10.5 in) | |
Weight | 4.6 kg (10 lb) | |
NIST-Traceable contact calibration | Data at –30°C, 0°C, 25°C, 75°C, 100°C, 125°C, and 150°C |