We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Flowline Switch-Tek LP50 provides reliable liquid level detection of water based conductive liquids with non-coating and/or scaling characteristics with a 1A relay output. Media examples include hydrochloric, sulfuric acid and water. The general purpose non-intrusive capacitance level switch provides reliable liquid level detection of water based conductive liquids with non-coating and/or scaling characteristics with a 1A relay output. The liquid level sensor is bracket mounted on the exterior wall of non-metallic tanks and applied as a high level alarm or low level alarm.
Accuracy: | ± 1mm in water |
Repeatability: | ± 0.5mm in water |
Dielectric range: | > 20 constants |
Conduct. range: | > 100 µ |
Supply voltage: | 12-36 VDC |
Consumption: | 25 mA maximum |
Contact type: | (1) SPST relay |
Contact rating: | 60 VA, 1A maximum |
Contact output: | Selectable NO / NC |
Process temp.: | F: -40° to 176° C: -40° to 80° |
Enclosure rating: | NEMA 4X (IP65) |
Enclosure mat.: | PSO |
Cable jack. mat.: | Polypropylene |
Cable type: | 4-conductor, shielded #22 AWG |
Cable length: | 10' (3m) |
Conduit entrance: | 1/2" NPT |
Tank mat. comp.: | Non-metallic |
Tank mounting: | Bracket w/3M adhesive, plastic thermal weld |
Tank wall thick.: | < 1" (25mm) |
Bracket material: | -6005: PE -1005: PP -5005: PVDF |
Classification: | General purpose |
Compliance: | CE |
Dimensions
Write Your Own Review