We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The Flowline EchoPod UG03 provides continuous level measurement up to 9.8’ (3m) with a 4-20 mA analog signal output and four relays. The UG03 is configured via Flowline's WebCal software.
Range: 4” to 9.8’ (10.1cm to 3m)
Accuracy: ± 0.2% of range
Resolution: 0.039” (1mm)
Dead band: 4” (10.1cm)
Beam width: 2” (5cm)
Configuration: WebCal® PC Windows® USB® 2.0
Memory: Non-volatile
Supply voltage: 14-28 VDC
Max. consumption: 0.5W
Loop resistance: 500 ohms @ 24 VDC
Signal output: 4-20mA, two-wire
Signal invert: 4-20mA or 20-4mA
Signal fail-safe: 4mA, 20mA, 21mA, 22mA, hold last
Contact type: (4) SPST relays
Contact rating: 60 VA, 1A maximum
Contact fail-safe: Open, closed, hold last
Contact hysteresis: Selectable
Process temp.: F: -40º to 176º, C: -40º to 80º
Temp. comp.: Automatic
Ambient temp.: F: -31º to 140º, C: -35º to 60º
Pressure: 30 psi (2 bar)
Enclosure rating: Type 6P (IP68)
Encl. material: Polypropylene
Transducer type: Reflective
Transducer mat.: Polyvinylidene fluoride
Cable jacket mat.: Polyurethane
Cable type: 9-conductor, shielded
Cable length: 48” (1.2m)
Process mount: -0001: 2” NPT, -0011: 2” G
Mount gasket: -0001: N/a, -0011: Viton®
Classification: General purpose
Approval (pending): UL 61010-1
Compliance: CE, RoHS
Write Your Own Review
- Mini-bulk storage
- Day tank
- Waste sumps