Extech VT10 Multifunction Voltage Tester - DISCONTINUED

Voltage LED steps              AC: 24, 48, 120, 208, 240, 277, 480, 600
                                         DC: 6, 12, 24, 36, 48, 110, 220, 400
ACV frequency range          50/60Hz
LED enable input voltage     >4.5V AC/DC
Accuracy                             -30% to 0% of the indication
Range selection                   Automatic
Max measuring current         ≤1.2mA (600VAC); ≤1.0mA (400VDC)
Display delay                       LED indication <0.1s
Input Impedance                  1MΩ (approx)
Continuity test                    Range 0 to 400kΩ, guaranteed on < 50kΩ; <10μA test current;
Low impedance test             12-250VAC/DC; impedance <6kΩ;
Operation time                    30 seconds on / 10 minutes off duty cycle
Power supply                        2 x “AAA” 1.5V alkaline batteries, 50mA max
Battery life                          Approx. 8 hours of continuous use typical
Operating Temperature        -10 to 55°C (14 to 131°F)
Storage Temperature           -30 to 60°C (-22 to 140°F)
Operating Humidity             10 to 85% RH (non-condensing)
Operating Altitude               2000m (7000 ft.) maximum
Safety                                This meter is intended for origin of installation use and protected,
                                          against the users, by double insulation per EN61243-3:2010 CATIII
                                          600V and CAT IV 600V.
Approvals                           CE, IP64
Dimensions                         240 x 78 x 40mm (9.4 x 3 x 1.6”)
Weight                               260g (9.2oz)