BK Precision 4055B 60 MHz Dual Channel Function Arbitrary Waveform Generator

FREQUENCY CHARACTERISTICS

Sine & Square

1 µHz – 60 MHz

Triangle, Ramp

1 µHz – 500 kHz

Pulse

1 µHz – 12.5 MHz

Noise (-3 dB)

> 60 MHz

Arbitrary

1 µHz – 12.5 MHz

Accuracy

± 25 ppm (1 year)

Resolution

1 µHz

ARBITRARY CHARACTERISTICS

Built-in Waveforms

196 built-in waveforms (includes DC)

Waveform Length

16k points / Ch

Vertical Resolution

14 bits

Sampling Rate

150 MSa/s

Minimum Rise/Fall Time

6.5 ns (typical)

Jitter (pk-pk)

8 ns (typical)

Non-Volatile Memory Storage

> 1000 16k points waveforms (100 MB in file system)

OUTPUT CHARACTERISTICS

Amplitude Range

2 mVpp – 10 Vpp into 50 Ω (4 mVpp – 20 Vpp into open circuit), ≤ 10 MHz

2 mVpp – 5 Vpp into 50 Ω (4 mVpp – 10 Vpp into open circuit), > 10 MHz

Amplitude Resolution

up to 4 digits

Amplitude Accuracy (10 kHz)

± (1 % + 1 mVpp)

Amplitude Flatness

± 0.3 dB (reference 10 kHz, 2.5 Vpp, 50 Ω load )

Cross Talk

< -60 dBc (both channels set to 0 dBm, sine 50 Ω load)

Offset Range (DC)

± 5 V into 50 Ω (± 10 V into open circuit)

Offset Resolution

up to 4 digits

Offset Accuracy

± ( |offset setting value| x 1% + 3 mV)

Channel Output Impedance

50 Ω, high impedance

Output Protection

short-circuit protection

WAVEFORM CHARACTERISTICS (Sine, Square, Triangle, Ramp)

Harmonic Distortion (Sine)

DC – 10 MHz, < - 60 dBc / 10 MHz – 30 MHz < -50 dBc / 30 MHz – 60 MHz, < - 40 dBc (0 dBm input signal)

Total Harmonic Distortion (Sine)

10 Hz – 20 kHz at 0 dBm, < 0.075%

Spurious (non-harmonic)

DC – 10 MHz, < -65 dBc / 10 MHz – 30 MHz, < -55 / 30 MHz – 60 MHz, < -40 (0 dBm input signal)

Rise/Fall Time (square)

< 4.2 ns (10 % – 90 %, at 1Vpp into 50 Ω)

Variable Duty Cycle (square)

0.001% - 99.999% (depending on frequency setting)

Asymmetry (50% duty cycle)

1% of period + 20 ns (typical,1 kHz, 1 Vpp)

Jitter (rms) cycle to cycle (square)

300 ps + 0.00 ppm of period (typical, 1 kHz, 1 Vpp)

Ramp Symmetry

0% – 100%

Linearity (triangle, ramp at 1 kHz, 1 Vpp, 100% symmetry)

< 1% of peak output (typical)

PULSE

Pulse Width

32.6 ns minimum, 100 ps resolution, 1,000,000 s max.

Rise/Fall Time

16.8 ns ( 1 Vpp, 50 10% – 90% 50 Ω load)

Duty Cycle

0.001% resolution

Overshoot

< 3 % (100 kHz, 1 Vpp)

Jitter (rms) cycle to cycle

300 ps + 0.05 ppm of period (typical, 1 kHz, 1 Vpp)

BURST

Waveform

ine, square, ramp, pulse, arbitrary, noise

Type

cycle (1-1000000 cycles), infinite, gated

Start/Stop Phase

0 ° – 360 °

Internal Period

1 µs – 1000 s

Gated Source

Internal, external trigger

Trigger Source

internal, external, manual

PHASE OFFEST

Range

0 ° – 360 °

Resolution

0.1 °

AM, FM & PM MODULATION CHARACTERISTCS

Carrier

sine, square, ramp, arbitrary (except DC)

Source

internal, external

Internal Modulation Waveform

sine, square, ramp, noise, arbitrary (1 mHz - 20 kHz)

AM Modulation Depth

0% – 120%, 0.1% resolution

FM Frequency Deviation

0 – 0.5*bandwidth, 10 µHz resolution

PM Phase Deviation

0 – 360 °, 0.1 ° resolution

ASK & FSK MODULATION CHARACTERISTICS

Carrier

sine, square, ramp, arbitrary (except DC)

Source

internal, external

Modulation Waveform

50% duty cycle square waveform (1 mHz – 50 kHz)

PWM MODULATION CHARACTERISTICS

Source

internal, external

Modulation Waveform

sine, square, ramp, arbitrary (except DC)

Internal Modulation Frequency

1 mHz – 20 kHz

DSB-AM MODULATION CHARACTERISTICS

Carrier

sine, square, ramp, arbitrary (except DC)

Source

internal, external

Modulation Waveform

sine, square, ramp, noise, arbitrary (1 mHz – 20 kHz)

SWEEP CHARACTERISTICS

Waveforms

sine, square, ramp, arbitrary (except DC)

Sweep Shape

linear or logarithmic, up or down

Sweep Time

1 ms – 500 s

Sweep Trigger

internal, external, manual

AUXILIARY INPUT/OUTPUT

Modulation Input

±6 Vpp (typical) for 100% modulation

Maximum input voltage: 7 V

Input impedance: 10 kΩ

Sync and Trigger Out

TTL compatible *1)

Output impedance 100 Ω

Maximum frequency: 1 MHz

Minimum pulse width: 500 ns

Trigger In

TTL compatible *2)

Input impedance: 10 kΩ

Minimum pulse width: 100 ns

Response time 100 ns (max) in sweep mode and 600 ns (max) in burst mode

REFERENCE CLOCK

Input

Frequency Range: 10 MHz ± 1 kHz (typical)

Min. Voltage Input: 1.4 V

5 kΩ input impedance

Output

Frequency Range: 10 MHz ± 25 ppm (typical) Voltage Level: 3.3 V (typical), 2 V (minimum)

50 Ω output impedance

FREQUENCY COUNTER

Measurement

frequency, period, duty cycle,

positive/negative pulse width

Measurement Range

100 mHz – 200 MHz (DC coupling)

10 Hz – 200 MHz (AC coupling)

Input Range

100 mV to ± 2.5 V (< 100 MHz, DC coupling)

200 mV to ± 2.5 V (100 MHz – 200 MHz, DC coupling)

100 mV to 5 V (< 100 MHz, AC coupling)

200 mV to 5 V ( 100 MHz – 200 MHz, AC coupling)

Input Impedance

1 MΩ

Coupling

AC, DC, HF, REJ

ENVIRONMENTAL AND SAFETY

Temperature

operating: 32 ºF – 104 ºF (0 °C – 40 °C)

storage: -4 ºF – 140 ºF (-20 °C – 60 °C)

Humidity

< 86º F (30 °C), ≤ 90 % RH

104 ºF (40 °C), ≤ 50 % RH

Altitude

operating: below 9,842 ft (3,000 m)

storage: below 49,212 ft (15,000 m)

Electromagnetic Compatibility

EMC Directive 2004/108/EC, EN61326:2006, EN61000-3-2:2006+A2:2009, EN61000-3-3:2008

Safety

Low voltage directive 2006/95/EC, EN61010-1:2001,

EN61010-031:2002+A1:2008

GENERAL

Display

4.3” TFT-LCD display, 480 x 272

Interfaces

LAN & USBTMC (standard), GPIB (optional), USB host port

Storage Memory

Arbitrary waveforms and instrument settings share the same non-volatile storage memory of 100 MB.

Power

100 – 240 VAC ± 10%, 50 / 60 Hz

100 – 120 VAC ± 10%, 400 Hz

Power Consumption

50 W max.

Dimensions (W x H x D)

263 x 96 x 295 mm (10.3” x 3.78” x 11.6”)

Weight

3.32 kg (7.32 lbs)

Standard Accessories

Getting started manual, instruction manual (downloadable), AC power cord, USB type A-to-type B cable