We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The Multifunction Clamp-on Meter Model CM605 is an ideal choice for both process and general industrial markets. It is also the perfect instrument for measuring 4 to 20mA process signals, as well as, the higher currents (up to 100A) associated with general industrial monitoring and troubleshooting. The Model CM605 is a versatile device that is capable of measuring both AC/DC voltage, up to 600V, and AC/DC current. It can also measure resistance up to 10kΩ and includes a continuity buzzer to assist in circuit verification. For operator convenience, the Model CM605 can also hold the last reading in the display and capture the peak value at the time of the measurement.
MODEL | CM605 |
ELECTRICAL | |
AC Current |
|
Measurement Ranges | 2 Ranges: 10A, 100A |
Accuracy & Resolution | 10A: 2.0% of Reading ± 10cts - 1mA Resolution 80A: 2.0% of Reading ± 10cts - 10mA Resolution > 80A: 3.5% of Reading ± 10cts - 10mA Resolution |
Frequency Range | 2 Ranges: 50 to 500Hz |
DC Current (positive only) | |
Measurement Ranges | 2 Ranges: 10A, 100A |
Accuracy & Resolution | 10A: 2.5% of Reading ± 10cts - 1mA Resolution 80A: 2.5% of Reading ± 10cts - 10mA Resolution > 80A: 4.5% of Reading ± 10cts - 10mA Resolution |
AC Volts | |
Measurement Ranges | 600Vrms |
Accuracy & Resolution | 1.5% of Reading ± 5cts - 100mV Resolution |
Frequency | 40 to 500Hz |
Input Impedance | 10MΩ, < 50pF |
DC Volts (positive only)* | |
Measurement Ranges | 600V |
Accuracy & Resolution | 1.0% of Reading ± 2cts - 100mV Resolution |
Input Impedance | 10MΩ |
Resistance (Ohms) | |
Measurement Ranges | 10kΩ (9999Ω) |
Accuracy & Resolution | 1.0% of Reading ± 3cts - 1Ω Resolution |
Test Voltage | < 3.0Vdc |
Continuity | |
Measurement Ranges | Buzzer < 100Ω ± 25Ω |
Resolution | 1Ω |
Test Voltage | < 3.0Vdc |
Analog Output | |
Output | 10mV/Aac & Adc through front banana jacks |
Frequency | 0 to 20kHz @ ± 3db |
Output Impedance | 3kΩ, < 50pF |
Other Functions | |
Adc Zero & Relative Function | One touch push button (∆ZERO Button) to Zero Adc, or other readings. Relative function also used in the other ranges to compare two measurements. |
HOLD Function | Holds A & V measurements when pressed (HOLD button) |
PEAK Function | Captures PEAK (1ms) V or A measurement when activated (PEAK Button) |
Auto-Ranging | “AUTO” displayed on LCD |
Over Range | “OL” displayed on LCD for all measurements |
Auto Power OFF | Auto Power OFF after approx 10 minute with Over-Ride |
Low Battery | Low Battery indication on LCD |
MECHANICAL | |
Max. Cable Diameter | Ø 0.45" (12mm) |
Max. Jaw Opening | Ø 0.60" (15mm) |
Power Source | Two 1.5V AAA (LR03) batteries (included) |
Dimensions & Weight | 7.95 x 2.76 x 1.33" (202 x 70 x 34mm) – 6.5 oz (180g) |
Safety Standards | IEC/EN 61010-1 and 2-032 – 600V CAT II and 300V CAT III – Pollution Degree 2 Class 2 – Double or reinforced insulation, CE mark |
*For negative measurement, add 2cts to the accuracy
Write Your Own Review