We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Wika Mensor’s CPG-KITH Hydraulic Service Kit CPG-KITH hydraulic service kit is the perfect tool for the hydraulic testing, adjustment and calibration of mechanical and electronic pressure measuring instruments through comparative measurements or for the setting of pressure switches. These and other tests can take place rapidly and reliably in the laboratory or workshop, or on site at the measuring point. With the service kit, service and maintenance are more comprehensive, safer and more versatile. The kit is high-quality finish, handy and durable and is also suitable for service use.
The service kit comes complete with a hydraulic hand test pump for the generation of a defined test pressure and also a highly accurate model CPG1500 precision digital pressure gauge as a reference instrument. Air is used as the pressure medium. Different connection adapters are also available in the test case. All components are carefully stowed in the case and protected for in-house transport.
If one connects the test item and the model CPG1500 precision digital pressure gauge to the test pump, on actuating the pump, the same pressure will act on both instruments. Via the fine adjustment valve, the test pressure is set exactly. By comparison of the two measured values at any given pressure value, a check of the accuracy and/or adjustment of the pressure measuring instrument under test can be carried out.
The collected data from the data logger of the digital pressure gauge can be transmitted wirelessly to the WIKA-Cal calibration software for further analysis. WIKA-Cal also offers, over and above PC-supported calibration, the management of the calibration and instrument data in an SQL database. A WIKA-Wireless interface is available for the data transfer.
Specifications | Imperial version CPG-KITH-USxx-3ZZ |
CPG1500 | |
Pressure range | See ordering information |
Pressure connection | 1/4 NPT male thread |
Wetted parts | Stainless steel |
CPP700-H | |
Pressure range | 0 ... 15,000 psig |
Pressure transmission medium | Hydraulic fluid based on mineral oil or single distilled water 1) 2) |
Pressure connection | 1/4 NPT female thread via adapter for reference instrument, hose with 1/4 NPT via adapter for test item |
Fine adjustment | Fine adjustment valve/volume adjustment |
Fluid reservoir | 200 cm³ (12.2 in³) |
Material | anodised aluminium, brass, stainless steel, ABS |
Sealings | FKM and NBR (standard) |
Dimensions (L x W x H) | 280 x 170 x 120 mm (11.02 x 6.69 x 4.72 in) |
Weight | 1.9 kg (4.19 lbs.) |
Standard accessories | Minimess® test item connection hose; length 1 m (3.3 ft) |
1) Other pressure transmission media on request.
2) Liquids are not included in the scope of delivery.
Certificates
Certificate | |
Calibration | Standard: 3.1 calibration certificate per EN 10204 Option: DKD/DAkkS calibration certificate |
Recommended recalibration interval | 1 year (dependent on conditions of use) |
Ordering information | Imperial version | |
Measuring range | Accuracy | |
CPG-KITH-US52-5-3ZZ | 0 … 700 psig | 0.05 % FS 3) |
CPG-KITH-US53-5-3ZZ | 0 … 1,500 psig | 0.05 % FS 3) |
CPG-KITH-US54-5-3ZZ | 0 … 2,000 psig | 0.05 % FS 3) |
CPG-KITH-US55-5-3ZZ | 0 … 3,000 psig | 0.05 % FS 3) |
CPG-KITH-US51-5-3ZZ | 0 … 5,000 psig | 0.05 % FS 3) |
CPG-KITH-US50-5-3ZZ | 0 … 10,000 psig | 0.05 % FS 3) |
CPG-KITH-US49-5-3ZZ | 0 … 15,000 psig | 0.05 % FS 3) |
CPG-KITH-US52-1-3ZZ | 0 … 700 psig | 0.1 % FS 3) |
CPG-KITH-US53-1-3ZZ | 0 … 1,500 psig | 0.1 % FS 3) |
CPG-KITH-US54-1-3ZZ | 0 … 2,000 psig | 0.1 % FS 3) |
CPG-KITH-US55-1-3ZZ | 0 … 3,000 psig | 0.1 % FS 3) |
CPG-KITH-US51-1-3ZZ | 0 … 5,000 psig | 0.1 % FS 3) |
CPG-KITH-US50-1-3ZZ | 0 … 10,000 psig | 0.1 % FS 3) |
CPG-KITH-US49-1-3ZZ | 0 … 15,000 psig | 0.1 % FS 3) |
3) FS = Full Span
- Oil and gas industry
- Maintenance and service facilities
- Calibration service companies and service industry
- Simple calibrations directly on site