We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The UEI DL389B is a True RMS dual display clamp meter with a temperature range of -22º to 752ºF (-30º to 400ºC). The DL389B AC volts is 750V, DC volts is 1000V, AC current (amps) is 400A, AC micro current (amps) is 2000µA, DC micro current (amps) is 2000µA, and the frequency is 199.99kHz.
Includes:
- • Test leads (ATL55)
- • K-Type temperature probe
- • 2 (AAA) batteries
- • Manual
- • Pouch
Features
| Min/Max | Yes |
| Ranging | Auto/Manual |
| Display count | 4000 |
| Auto power off | Yes |
| Backlight | Yes |
| Dual display | Yes |
| Worklight | Yes |
| Magnetic mount | Yes |
| Warranty | 2-Year Limited |
| K-type input | Yes |
| Digital | Yes |
Functions
| TRMS | Yes |
| AC Volts | 750V |
| DC Volts | 1000V |
| AC current (amps) | 400A |
| AC micro current (amps) | 2000µA |
| DC micro current (amps) | 2000µA |
| Resistance (Ohms) | 40MΩ |
| Capacitance (Farads) | 4000 micro Farads |
| Frequency (Hertz) | 199.99kHz |
| Duty cycle | 99% |
| Temperature | -22˚ to 752˚F (-30˚ to 400˚C) |
| Continuity | Yes |
| Diode | Yes |
| NCV Detection | Yes |
| K-type Temperature Range | -22˚ to 752˚F (-30˚ to 400˚C) |
Standards
| ETL listed | 61010-1:2012 |
| CAT Rating | CATIII 600V |
Write Your Own Review
- Measure distorted and non-distorted sine waves
- Measure linear electrical loads
- Control voltage or system board checks
- Circuit continuity or specified resistance
- Motor run or fault starts
- Quick check of live wires
- Diode test malfunctions/ unbroken paths