We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The Texmate DL-40RPM is an economically smart meter relay for RPM measurement. This meter comes standard with a red 4 digit LED display or you can choose an optional green or super bright LED display.
Input Specs: | Depends on Input Signal Conditioner |
A/D Converter: | 14 Bit Single Slope |
Accuracy: | ±1 count |
Temp. Coeff.: | 100 ppm/°C (Typical) |
Warm up time: | 2 minutes |
Conversion Rate: | 5 conversions per second (Typical) |
Display: | 4 digit 0.56" Red LED display (std), 0.56” or 0.8" Red, Green, or Super Bright Red are optional. Range 0 to 9999 counts. |
Polarity: | Assumed positive |
Decimal Selection: | Automatic by selection of resolution |
Positive Overrange: | Top segments of digital display flash |
Relay Output: | Two 5 Amp Form A relays and two 10 Amp Form C, or 5 Amp form A relays |
Analog Output: | Isolated 16 bit user scalable mA or V |
AIC (mA out) | 4-20 mA @ 0 to 500Ω max loop resistance |
AIV (volts out) | 0-10 V DC @ 500 Ω or higher resistance |
Power Supply: | AC/DC Auto sensing wide range supply |
PS1 (std) | 85-265 VAC / 95-370 VDC @ 2.5W max 3.5W |
PS2 | 15-48 VAC / 10-72 VDC @ 2.5W max 3.5W |
Operating Temp.: | 0 to 60 °C |
Storage Temp: | –20 °C to 70 °C |
Relative Humidity: | 95% (non condensing) |
Case Dimensions: | 11/8 DIN, Bezel: 96x48 mm (3.78”x1.89”) Depth behind bezel: 117 mm (4.61”) Plus 11.8 mm (0.47”) for Right-angled connectors, or plus 20 mm (0.79”) for Straight-thru connector |
Weight: | 6.5 oz., 8.5 oz when packed |
Write Your Own Review