Toggle Nav
My Quote
Menu
Account
pdf
Texmate DL-40JANUS-ACA AC Current Meter, Transmitter and Controller

Texmate DL-40JANUS-ACA AC Current Meter, Transmitter and Controller

Be the first to review this product
SKU
DL-40JANUS-ACA
Manufacturer:
Texmate
Texmate

Key Features:

  • External transmitters or signal conditioners can be eliminated by direct connection of the sensor output to : – AC Current
  • Optional isolated 14 bit analog output. User or factory scalable to 4 to 20 mA, 0 to 20 mA or 0 to 10 V across any desired digital span from ± one count to the full scale range of – 1999 to 9999 (12000 counts).
  • Optional Isolated Modbus RTU RS-485 serial communication with selectable baud rate (9600, 19200), address and parity
  • Auto-sensing AC/DC power supply. For voltages between 85-265 VAC / 95-300 VDC (PS1) or 15-48 VAC / 10-72 VDC (PS2).
  • Standard red or optional green or super bright red 4-digit LED with display range –1999 to 9999 (12000 counts)
  • Red or green 0.8” LED large display option
  • Four annunciator LEDs provide front panel alarm status indication for up to four setpoints
  • Up to optional six relays in combination of six, four or two 4 Amp Form A relays or two 9 Amp Form C with two or four 4 Amp Form A relays are available
  • Automatic intelligent averaging smooths noisy signals, while providing a fast display response to real input signal changes
  • Three-button programming from the front panel (UP, DOWN and PROGRAM buttons)

Software Features

  • Front panel selectable four-level brightness control for digital display and setpoint LEDs
  • Four programmable setpoints
  • Relay activation can be selected to occur above (HI) or below (LO) each setpoint
  • Hysteresis setting for all four setpoints. Delay on make and delay on break for SP1 and SP2.
  • Peak and Valley. View and Reset.
  • Program Lock switch
Product Options:

Maximum 25 characters

Ship to USCalculate Shipping Cost
Call For Price

Secured and trusted checkout with

The Texmate DL-40JANUS-ACA is a panel meter with High Accuracy programmable AC amp meter, transmitter and controller that allows rescaling with or without an external signal source and features a switchable program lock. The DL-40JANUS-ACA is scalable to read the Primary CT with a 5 Amp or 1 Amp secondary.

Input Specs:Depends on Input signal conditioner
A/D Converter:14 bit single slope
Accuracy:±(0.05% of reading + 2 counts)
Temp. Coeff.:100 ppm/°C (Typical)
Warm up time:2 minutes
Conversion Rate:5 conversions per second (Typical)
Display:4 digit 0.56" Red LED display (std),
0.56” Green, 0.8" Red/Green, or
0.56" Super Bright Red are optional.
Range 0 to 9999 counts.
Polarity:Assumed positive. Displays – negative
Decimal Selection:Front panel button selectable, X•X•X•X•
Positive Overrange:Top segments of digital display flash
Negative Overrange:Bottom segments of digital display flash
Relay Output:Up to Six Relays in combination of six, four or two 4 Amp Form A relays or two 9 Amp Form C with two or four 4 Amp Form A relays.
Analog Output:Isolated 16 bit user scalable mA or V
AIC (mA out)4-20 mA @ 0 to 500Ω max loop resistance
AIV (volts out)0-10 V DC @ 500 Ω or higher resistance
Power Supply:AC/DC Auto sensing wide range supply
PS1 (std)85-265 VAC / 95-300 VDC, 50-400Hz @ 3W
PS215-48 VAC / 10-72 VDC, 50-400Hz @ 2.5W
Operating Temp.:0 to 50 °C
Storage Temp:-20 °C to 70 °C.
Relative Humidity:95% (non condensing)
Case Dimensions:1/8 DIN, Bezel: 96x48 mm (3.78”x1.89”) Depth behind bezel: 117 mm (4.61”) Plus 11.8 mm (0.47”) for Right-angled connectors, or plus 20 mm (0.79”) for Straight-thru connector.
Weight:6.5 oz., 8.5 oz when packed
CertificationUL Listed

 

Manuals

Texmate DL-40JANUS-ACA User Manual

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

    No accessories available