Texmate CL-B101D40 101 Segment Circular Bargraph with 4 Digit Display

Key Features:

• External transmitters or signal conditioners can be eliminated by direct connection of the sensor output to more than 40 Plug-in Input Signal Conditioners that include:
  – AC/DC Current
  – Pressure
  – Resistance
  – AC/DC Voltage
  – Process
  – Temperature
  – Load Cell
  – Prototype
  – 4 to 20 mA
• Optional isolated 16 bit analog output. User or factory scalable to 4 to 20 mA, 0 to 20 mA or 0 to 10 V across any desired digital span from ± one count to the full scale range of – 1999 to 9999 (12000 counts)
• A Programmable Tricolor (Red-Green-Orange) or mono color (red or green), 101 segment high brightness bargraph
• Red 4-digit LED display with a range of -1999 to 9999 (12000 counts). Optional green digital display.
• Front panel LED annunciators provide indication of setpoint status
• Two 9 Amp Form C, and two 4 Amp Form A or 4 x 4 Amp Form A relays available
• Auto-sensing AC/DC power supply. For voltages between 85-265 V AC / 95-300 V DC (PS1) or 18-48 V AC / 10-72 V DC (PS2).
• 24 V DC excitation is available to power external 4/20mA transmitters and 5 or 10 V DC excitation is available for resistance bridge type sensors
• Provision to connect an external programming lockout switch
• Provision for external DIM switch to reduce the brightest display setting by 50%
• Automatic intelligent averaging, smooths noisy signals while providing a fast display response to real level changes

Software Features

• The bargraph can display, full scale, any desired portion of the digital reading
• Setpoint 1 has delay-on-make and delay-on-break plus a special “pump on pump off” mode that creates a Hysteresis Band between SP1 and SP2
• Four programmable setpoints with adjustable Hysteresis
• Bargraph center zero function
• Relay activation can be selected to occur above (hi) or below (Lo) each setpoint
• Digital display blanking
• Decimal point setting
• Four-level brightness control