We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The Simpson Falcon Series temperature indicator is a high accuracy, microprocessor-based panel instrument designed to provide the maximum flexibility in temperature measurement. The Falcon automatically compensates for differences between unit temperature (room temperature) and ice point (0º), and provides the complete NIST range for six thermocouple types as well as Platinum 100 RTD. Input ranges are userselectable and can be changed without recalibration.
The Falcon series features a standard 1/8 DIN case with a depth of less than 3”. Screw terminals are standard for easy installation.
DISPLAY | |
Type | 7- segment, red LED |
Height | 0.56” (14.2mm) |
Decimal Point | Jumper-selectable 2-position (corresponding to resolution desired) |
| |
Overrange Indication | Most significant digit = “1”; other digits blank |
| |
Polarity | Automatic, with “-” indication, ”+” indication implied |
| |
POWER REQUIREMENTS | |
AC Voltages | 120 or 220VAC, ±10% 50/60Hz |
DC Voltages | 9-32 DCV, ±1% |
Power Consumption | 3VA |
| |
ENVIRONMENTAL | |
Operating Temperature | 0 to 55°C |
Storage Temperature | -10 to 60°C |
Relative Humidity | 0 to 85% non-condensing |
Warm-up Time | Less than 20 minutes |
| |
INPUTS | |
Thermocouple | J, K, E, T, R, and S |
RTD | Platinum 100 (.00385 alpha), 2, 3 or 4 wire |
Millivolt | ±84mV reading of uncompensated mV |
Input Impedance | 7MΩ(typical) |
Conversion Rate | 2-1/2 times per second |
Open Thermocouple Detection | -1 on display, -40nA bias on thermocouple |
| |
Write Your Own Review
