Skip to the beginning of the images gallery

Simpson 228 Leakage Current Tester

Be the first to review this product

SKU

40027

Manufacturer:

Simpson

Key Features:

Detects dangerous AC & DC leakage current present on the conductive surfaces of electrical or electronic equipment
Designed to meet new IEC, ANSI, and UL guidelines
Reaction, Let-Go and Unweighted Burn Hazard network measurements
Battery-powered for maximum portability

Product Options:

Simpson Model 228 Calibration Options

Calibration Not Included

Standard Calibration Certificate + $85.00

ISO 17025 Accredited Calibration Certificate + $140.00

Ship to

Calculate Shipping Cost

Country

State/Province

Zip/Postal Code

Qty

$975.55

Secured and trusted checkout with

Product Detail

The 228 detects both AC and DC leakage current and simulates human response at three different levels -- reaction, let-go, and burn hazard. Each Model 228 comes with test leads with alligator clips, manual, and batteries.

Short Description

GENERAL	Reaction Response Network	Let-Go Response Network	Unweighted Burn Hazard Response Network
Equivalent Network Component Values:	Complies with values specified in IEC 990 (Excluding fuse)
Equivalent Measuring Instrument Load:	1 MOhm - 10pF	1 MOhm - 62 pF	1 MOhm - 1 pF
Ranges:	0.3, 1, 3, 10 M.I.U.	0.3, 1, 3, 10 M.I.U.	0-100 mA RMS
Current Accuracy:	+/- 2% F.S. @ 60 Hz
Meter Measurement Method:	True RMS
Meter Frequency Response:	(Relative to ANSI C101-1992 or UL-1459 2nd edition)
DC to 1 Hz	Pointer shall track within 5% of peak
2Hz to 19 Hz (Accuracy not supported)
20 Hz to 200 Hz	+/- 2% F.S.	+/- 2.5% of F.S.	+/- 2% F.S.
200 KHz to 1 MHz	+/- 2% F.S.	+/- 2.5% F.S.	+/- 5% F.S.
Output Sensitivity:	Full scale meter indication equals 1V RMS (Measured with a 1 MOhm, 12 pF load)
Output Accuracy:	+/- 2% of reading @ 60 Hz
Output Frequency Response:	(Relative to ANSI C101-1992 or UL-1459 2nd edition)
DC to 50Hz	+/- 2% of reading
50 Hz to 100 KHz	+/- 2.5% of reading	+2%/-3% of reading	+/-2% of reading
100 kHz to 1 MHz	+/- 5% of reading
Voltmeter Range:	0-300 V (AC or DC)
Voltmeter Accuracy: DC to 1 Hz	Pointer shall track within 5% of peak
2Hz to 19 Hz (Accuracy not supported)
20 Hz to 1 KHz	+/- 3% F.S. @ 60 Hz (Add +/- 1% for every additional 100 Hz)
Voltmeter Frequency Response:	DC to 1KHz
Power Requirements:	(2) 9V (NEDA 1604A) batteries
Physical:	7" x 5.25" x 3.125", 2-1/2 lbs (1.4kg), ABS plastic, fused input
Enviornmental:	27 Deg C +/- 2 Deg C, 70% non condensing relative humidity. Outside range derate by 10% per Deg C
Maximum Operating Range:	0 Deg to 40 Deg