We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The Extech 475055 is a three-range force gauge (tension/compression) with 0.5% basic accuracy.
| Range | 220 lbs, 100kg, 980 Newtons |
| Accuracy (23°C) | ±(0.5%rdg + 0.1lbs, 0.1kg or 0.4N) |
| Resolution | 0.05lbs, 0.05kg, 0.2 Newtons |
| Overload Capacity | 150kg |
| Circuit | Custom LSI microprocessor |
| Zero adjust | Button for Peak Hold and normal display zero |
| Display | 5 digit LCD type; Digit height: 0.63” (16 mm) |
| Update Rate | Fast mode 0.2 seconds; Slow mode 0.6 seconds |
| Over range Indicators | LCD displays “¯ ¯ ¯ ¯“ for tension measurements and “--------“ for compression measurements |
| Zero / Tare Control | Up to Maximum capacity |
| Full Scale Deflection | <1mm |
| Transducer type | S-type load cell with 2 hooks (thread size: M6 x 1mm ISO) and 6.5 ft (2m) cable |
| Peak Hold | Freezes Max reading on display |
| Data Output | RS-232 serial interface with 16-bit data stream output |
| Operating Temperature | 32 °F to 122 °F (0°C to 50°C) |
| Operating RH | Max. 80% Relative Humidity (RH) |
| Power Supply | 6 x 1.5V ‘AA’ batteries or 9VDC adapter (not included) |
| Power consumption | 28mA (approx.) |
| Weight | Meter: 1 lb (450g) |
| Sensor: 0.84 lbs (380g) | |
| Dimensions | Meter: 8.5 x 3.5 x 1.8” (215 x 90 x 45 mm) |
| Sensor with 2 hooks: 5.7 x 2.0 x 0.6” (145 x 51 x 15 mm) | |
| Cable length: 6.5 ft. (2m) | |
| Test Stand Mounting Holes | Located on rear (thread size: M5 x 0.8mm ISO); mounting screws included. Holes are 60mm apart |
Write Your Own Review