We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Waterproof to 20m, The HOBO Waterproof Shuttle offers useful readout and relaunching of underwater and outdoor HOBO data loggers with an Optic USB interface. Its versatility allows for the HOBO Waterproof Shuttle to be used as a base station as well.
NOTE: Included are couplers for compatibility with five of the most popular logger types including: UA Pendants, U20 water level data loggers, the U22 Water Temp Pro v2, our UTBI TidbiT, U24 Conductivity and U23 data loggers.
NOTE: HOBOware Pro software required.
Compatibility: All HOBO U-Series loggers with optic USB.
Not compatible with the HOBO U-Shuttle (U-DT-1).
Requirements: HOBOware 2.2+
Compatible logger and matching coupler
- For UA Pendant (Part # COUPLER2-A)
- For U20 Water Level (Part # COUPLER2-B)
- For U22 Water Temp Pro v2 (Part # COUPLER2-C)
- For UTBI TidbiT v2 (Part # COUPLER2-D)
- For U23 HOBO Pro v2 (Part # COUPLER2-E)
Data capacity: 63 logger readouts of up to 64K each
Operating temperature: 0° to 50°C (32° to 122°F)
Storage temperature: -20° to 50°C (-4° to 122°F)
Wetted materials: Polycarbonate case, EPDM o-rings and retaining
loop
Waterproof: To 20 m (66 feet)
Time accuracy ± 1 minute per month at 25°C (77°F)
Logger-to-shuttle transfer speed: Reads out one full 64K logger in about 30 seconds
Shuttle-to-host transfer speed: Full shuttle offload (4 MB) to host computer in 10 to 20 minutes, depending on computer
Batteries: 2 AA alkaline batteries required for remote operation
Battery life: One year or at least 50 complete memory fills, typical use
Weight: 150 g (4 oz)
Dimensions: 15.2 x 4.8 cm (6.0 x 1.9 inches)
The CE Marking identifies this product as complying with the relevant directives in the European
Union (EU).
Manuals
The U-DTW-1 is for use in Indoor , Outdoor and Underwater environments