We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Outfitted with all the features and functions of the DLRO200-EN, Megger’s DLRO200-115 Digital Low Resistance Ohmmeter has the addition of a filtered output.
Ideal for applications that require a smooth DC current, the extra output filtering lessens mains frequency ripple and is able to drive 200A through 11mΩ total current loop resistance. More still, the filtered output eradicates magnetic transients that, if left in the test circuit, may inductively trip a breaker’s control.
Filtered output not required? View the Megger DLRO200-EN by clicking here.
Measurement: | |
Range: | 0.1 μΩ to 999.9 mΩ |
(Subject to supply voltage and leads used) | |
Accuracy: | |
Voltage: | ±0.5% ± 0.1 mV |
Current: | ±0.5% ± 0.1 A |
Resistance: | Better than 1% from 100 μΩ to 100 mΩ |
Current Lead Resistance (Megger supplied leads) | |
2 x 16 ft (5 m) 25 mm² current leads | 8 mΩ |
2 x 16 ft (5 m) 50 mm² current leads | 4 mΩ |
2 x 33 ft (10 m) 70 mm² current leads | 5.4 mΩ |
2 x 49 ft (15 m) 95 mm² current leads | 6 mΩ |
Maximum Continuous Test Time | |
More than 10 minutes at 200 A @ 68 °F (20 °C) ambient. | |
Power Supply for full output (additional smoothed): | |
100 to 130 V 50/60 HZ with a load less than 11 mΩ including current leads | |
Test Modes: | Manual, Auto, Continuous. |
Test Time: | 10 seconds NORMAL /AUTO mode. Refreshed every 2 seconds in CONTINUOUS mode |
Display: | Large, high resolution backlit LCD |
Warnings: | Current flowing: - LED. Other warnings are shown on the lcd display. |
Data Transfer: | Real time or batch download via R5232 using Download Manager. |
Storage Capacity: | 300 result sets and memo, battery backed for 10 years. |
Memo field: | 160 characters max. |
Test Current Range: | Filtered direct current; 10 A to 200 A d.c. |
Accuracy: | ±2% ±2 A |
Voltmeter input impedance: | >200 kΩ |
Hum rejection: | 5 V rms 50 Hz/60 Hz |
Temperature Operation: | 14 to +122 °F (-10 to +50 °C) |
Storage: | -13 to 149 °F (-25 to +65 °C) |
Calibration: | 68 °F (20 °C) |
Co-efficient: | <0.05% per °C |
Max. Humidity: | 95% RH non-condensing |
Max Altitude: | 6562 ft. (2000 m) |
Safety: | IEC61010 - (1995) |
EMC: | EN61326 annex A (heavy industrial) |
Dimensions: | 16.4 x 9.84 x 10.63 in. (410 x 250 x 270 mm) |
Weight: | 31.97 lbs. (14.5 kg) excluding test leads |
Write Your Own Review
- • Switch Contacts
- • Circuit Breaker Contacts
- • Busbar Joints