We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
LMI has delivered their model B13 as an installment to their Series B Chemical Metering Pumps. The B13 supports a 4.5 GPH (17.0 l/h) maximum capacity, 50 PSIG (3.5 Bar) maximum pressure and a manually adjustable stroke length and speed.
Gallons per Hour* | Liters per Hour* | mL/cc per Minute* | mL/cc per Stroke | Maximum Injection Pressure |
Min Max | Min Max | Min Max | Min Max | |
0.005 4.5 | 0.017 17.0 | 0.28 284 | 0.28 2.84 | 50 psi (3.4 Bar) |
*Minimum output is based on 1 stroke per minute and 10% stroke setting, minimum output can be reduced further in external mode. B9 pumps may be programmed for strokes per hour for lower outputs.
Strokes per Minute (Adjustable) | Stroke Length (Adjustable) Recommended Minimum | Average Input Power at Max Speed | Shipping Weight |
Min Max | |||
1 100 | 10% | 29 watts | 15 lbs (6.9 kg) |
Liquid End Specifications:
LIQUIPRO Liquid Ends | ||||||
Liquid End | Head / Fittings | Balls | Liquifram | Cartridge Valve or Seal Rings | Accs. Valve | Tubing & Connection |
362SI | PVDF / PVDF | .375 Ceramic | Fluorofilm | PVDF/ Polyprel | 4FV | PE .375" O.D. |
362TI | PVDF / PVDF | .375 Ceramic | Fluorofilm | PVDF/ Polyprel | 3FV | PE .375" O.D. |
363SI | PVDF / PVDF | .375 Ceramic | Fluorofilm | PVDF/PTFE | 4FV | PE .375" O.D. |
363TI | PVDF / PVDF | .375 Ceramic | Fluorofilm | PVDF/ PTFE | 3FV | PE .375" O.D. |
368SI | PVC / PVC | .375 Ceramic | Fluorofilm | PVDF/ Polyprel | 4FV | PE .375" O.D. |
368TI | PVC / PVC | .375 Ceramic | Fluorofilm | PVDF/ Polyprel | 3FV | PE .375" O.D |
460SI | Acrylic / PVC | .375 Ceramic | Fluorofilm | PVDF/ Polyprel | 4FV | PE .375" O.D. |
460TI | Acrylic / PVC | .375 Ceramic | Fluorofilm | PVDF/ Polyprel | 3FV | PE .375" O.D. |
465NI | Polypropylene | Ceramic | Fluorofilm | PTFE |
| PE .375" O.D. |
465SI | Polypropylene | Ceramic | Fluorofilm | PTFE | 4FV | PE .375" O.D. |
468SI | PVC / PVC | .375 Ceramic | Fluorofilm | PVDF/ Polyprel | 4FV | PE .375" O.D. |
468TI | PVC / PVC | .375 Ceramic | Fluorofilm | PVDF/ Polyprel | 3FV | PE .375" O.D |
469SI | Acrylic / PVDF | .375 PTFE | Fluorofilm | PVDF/ Polyprel | 4FV | PE .375" O.D. |
LMI Liquid Ends | |||||
Liquid End | Head / Fittings | Balls | Liquifram | Cartridge Valve or Seal Rings | Tubing & Connection |
75HV |
Polypropylene |
316 S.S. |
Fluorofilm |
PTFE | PE .5" O.D. Vinyl .938" O.D. |
76HV |
Acrylic/PP |
316 S.S. |
Fluorofilm |
FKM | PE .5" O.D. Vinyl .938" O.D. |
277 | 316 S.S. | 316 S.S. | Fluorofilm | 316 S.S. | Pipe 1/4" NPT M |
3FV indicates that the pump is equipped with an LMI Three Function Valve (pressure relief, priming aid, line drain).
4FV indicates that the pump is equipped with an LMI Four Function Valve. This diaphragm type, anti-syphon/pressure relief valve is installed on the pump head. It provides anti-syphon protection and aids in priming, even under pressure.
AUTOPRIME Liquid Ends AUTOPRIME liquid ends are used in applications with off-gassing liquids such as Sodium Hypochlorite | ||||||
Liquid End | Head / Fittings | Balls | Liquifram | Seat / O Rings | Accs. Valve | Tubing & Connections |
D60HI | Acrylic / PVC | Ceramic | Fluorofilm | Polyprel | 4FV | PE 3/8" O.D. |
D60AI | Acrylic / PVC | Ceramic | Fluorofilm | Polyprel | - | PE 3/8" O.D. |
D68HI | PVC / PVC | Ceramic | Fluorofilm | Polyprel | 4FV | PE 3/8" O.D. |
D68AI | PVC / PVC | Ceramic | Fluorofilm | Polyprel | - | PE 3/8" O.D. |
AUTOPRIME liquid ends have 3 check valves: Suction on the bottom; Discharge on the front; Autoprime bleed on the top. By design, a repeatable portion of the process fluid continuously bleeds through the top check valve to be returned to the chemical supply. The result is the assurance that any gas in the head is automatically relieved thus eliminating air-binding. Depending on application, output may be reduced up to 50%. Variables include supplier piping, stroke length and speed setting. The maximum output per the tables above is reduced to account for the continuous bleed.
By design, a repeatable portion of the process fluid continuously bleeds through the top check valve to be returned to the chemical supply.
Output Information with AutoPrime Liquid End - Estimated | ||||
GPH | Liters/hr | mL/cc per Minute | mL/cc per Stroke | Maximum Pressure |
4.0 | 15.1 | 252.4 | 2.52 | 50 psi (3.4 Bar) |
Write Your Own Review