We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The KOBOLD VKM flowmeters and switches fill an important gap in the high viscosity media measurement arena. Using KOBOLD’s patented viscosity compensation system, these instruments are essentially insensitive to viscosity and density changes during operation. This development in flow and measurement control technology has resulted in an extremely versatile device usable in many applications where standard technologies have been inconsistant or otherwise have failed.
Accuracy: ±5% full scale
Flow Media: e.g. mineral oil, water and other liquids
Mounting: universal, without recalibration
Measuring Principle: with float, spring-loaded
Max. Temperature: 240°F
Max. Pressure: 3600 PSIG for Brass units
5000 PSIG for SS units
Viscosity-compensated: up to Δv=540 cSt with same scale
Density-compensated: up to Δp=30 lb/ft3 with same scale
Housing: Nickel-plated Brass or SS 304
Fittings: Nickel-plated Brass or SS 304
Float: Brass or SS 304
Orifice: SS 301
Spring: SS 301
Seals: Buna-N for Brass units, Viton for SS units
Electr. Switch Housing: Plastic
Magnetically Operated Pointer Indicator: Nickel-plated Brass, Polycarbonate
Mode of Electr. Protection: NEMA 4
Reed Contact:
N/O: AC: 1.5 A, 240 VAC,, 50 VA
DC: 1.0 A, 200 VDC, 50 W
SPDT: AC: 0.8 A, 240 VAC, 30 VA
Compact Electronic Option C34P
Power Requirement: 24VDC ±20%
Display: 3 digit LED
Output: 4-20mA, 3-wire RLoop<500 ohms
Switch: PNP, 300 mA Max.
Electrical Connection: Micro-DC plug, 4-Pin male
Electrical Protection: NEMA 4X/IP65