We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The KOBOLD DTK Series pelton wheel flow sensor was designed for the high volume OEM market. The compact pelton wheel design requires no inlet or outlet straight piping runs, allowing the device to be installed in locations where space is at a premium. The DTK pelton wheel flow sensor employs a very simple design. A nozzle built into the inlet fitting directs flow into an impeller with embedded permanent magnets. Impeller rotation is detected by a Hall effect sensor as liquid flow causes the paddle to rotate. The sensor generates a pulse each time a magnet passes, and the pulse frequency is directly proportional to flow rate. The pelton wheel design provides a very repeatable and linear output. The DTK Series OEM pelton wheel flow sensor is available with a stainless steel body for use with a wide variety of compatible, water-based liquids. The simple and reliable design of the KOBOLD DTK Series pelton wheel flow sensor makes it an economical choice for many applications.
Measuring Principle: Accuracy: Linearity: Repeatability: Max. Pressure: Process Temperature Range: Ambient Temperature Range: Wetted Parts Body: Orifice & Axle: Impeller: O-ring: Fittings: Power Requirement: Output: Protection: | Pelton turbine with Hall effect sensor ±2% of full scale ±1% of full scale ±0.25% of measured value 430 PSIG -40 to +176°F -20 to +140°F 304 stainless steel 316L stainless steel PVDF Viton 1/4” NPT or 1/4” BSP female 4-24 VDC @ 5 mA max. NPN open collector, 20 mA Max. NEMA 4X/IP65 |