We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The INOR IPAQ R460 (70R4600010) is able to convert Pt, Ni, KTY and TC sensor signals as well as potentiometer, resistor and mV signals to isolated standard signals. The IPAQ R460 can be configured via PC with the INOR-Set (70USBIM010, Not Included) and the data records can be stored and documented.
Type | Rail-mounted |
Input | RTD, Thermocouple, mV, ohm and KTY |
Input RTD | Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni500, Ni1000 |
Input Thermocouple | Type B, E, J, K, L, N, R, S, T, U, W5Re_W26Re, W3Re_W25Re |
Measuring range RTD | Pt 100, Pt 200, Pt 500, Pt 1000: -200… +850 °C Ni 100: -60… +250 °C Ni 200, Ni 500, Ni 1000: -50… 180 °C |
Measuring range Thermocouple | Type B: +250… +1820 °C Type C (W5Re_W26Re): 0… +2315 °C Type D (W3Re_W25Re): 0… +2315 °C Type E: +270… +1000 °C Type J: +210… +1200 °C Type K: +200… +900 °C Type L: +200… +900 °C Type N: +270… +1300 °C Type R: -50… +1768 °C Type S: -50… +1768 °C Type T: -270… +400 °C Type U: +200… +600 °C |
Type of Transmitter | Digital |
Output | 0…20 mA, 4…20 mA, 0…10 mA, 2…10 mA, 0…5 V, 0…10 V, 1…5 V, 2…10 V |
Galvanic isolation | 3 kV AC, 50 Hz, 1 min |
Measuring channels | 1 channel |
Sensor connection | 2-, 3-, 4-wire |
Power supply | 24 V DC Voltage range 9.6…31.2 VDC, approx. 0.8 W |
Typical accuracy | Max. ±0.05 K or ±0.05 % of measuring range |
Configuration | DIP switch or INOR-Set |
EMC | EN 61326-1 |
Ambient temperature | Operation: -25…+70 °C (-13…+158 °F) Transport and storage: -40…+85 °C (-40…+185 °F) |
Design | 6.2 mm:n (0.244″) bayed case, protection class IP 20, mounting on 35 mm top-hat rail acc. to EN 60715 |
Weight | approx. 70 g |
Write Your Own Review