We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Delivering the most rapid 204 µs sweep speed, GW Instek is introducing their new GSP-9330 3.25GHz Spectrum Analyzer. The quick sweep time, in addition to the signal demodulation functions, allows users to effortlessly handle and evaluate modulation signals and capture transient signals with ease.
The GSP-9330 is equipped with the analog AM/FM demodulation and analysis function and offers digital signal ASK/FSK and 2FSK demodulation and analysis abilities as well. Even more, the analyzer assists in EMC tests with the EMC Pretest Solution which enables issues to be identified and addressed in the beginning stages of product development. The GSP-9330 has a built-in EMI dedicated 200/9 k/120 k/1 MHz filter and 20dB low noise amplifier.
Frequency | |||
Frequency | Range | 9 kHz to 3.25 GHz | |
Resolution | 1 Hz | ||
Frequency Reference | Accuracy | ±(period since last adjustment X aging rate) + stability over temperature + supply voltage stability | |
Aging Rate | ±1 ppm max. | 1 year after last adjustment | |
Frequency Stability over Temperature | ±0.025 ppm | 0 to 50 °C | |
Supply Voltage Stability | ±0.02 ppm |
| |
Frequency Readout Accuracy | Start, Stop, Center, Marker | ±(marker frequency indication X frequency reference accuracy + 10% x RBW + frequency resolution) | |
Trace points | Max 601 points, min 6 points | ||
Marker Frequency Counter | Resolution | 1 Hz, 10 Hz, 100 Hz, 1 kHz | |
Accuracy | ±(marker frequency indication X frequency reference accuracy + counter resolution) | RBW/Span >=0.02 ; Mkr level to DNL>30 dB | |
Frequency Span | Range | 0 Hz (zero span), 100 Hz to 3.25 GHz |
|
Resolution | 1 Hz |
| |
Accuracy | ± frequency resolution1 | RBW: Auto; | |
Phase Noise | Offset from Carrier |
| Fc =1 GHz; RBW = 1 kHz, VBW = 10 Hz; Average ≥ 40 |
10 kHz | <-88 dBc/Hz | Typical | |
100 kHz | <-95 dBc/Hz | Typical | |
1 MHz | <-113 dBc/Hz | Typical | |
Resolution Bandwidth (RBW) Filter | Filter Bandwidth | 1 Hz to 1 MHz in 1-3-10 sequence | -3dB bandwidth |
200 Hz, 9 kHz, 120 kHz, 1MHz | -6dB bandwidth | ||
Accuracy | ± 8%, RBW = 1MHz | Nominal | |
± 5%, RBW < 1MHz | Nominal | ||
Shape Factor | < 4.5:1 | Normal Bandwidth ratio: -60dB:-3dB | |
Video Bandwidth (VBW) Filter | Filter Bandwidth | 1 Hz to 1 MHz in 1-3-10 sequence | -3dB bandwidth |
Amplitude | |||
Amplitude Range | Measurement Range | 100 kHz to 1 MHz | Displayed Average Noise Level (DANL) to 18 dBm |
1 MHz to 10 MHz | DANL to 21 dBm | ||
10 MHz to 3.25 GHz | DANL to 30 dBm | ||
Attenuator | Input Attenuator Range | 0 to 50 dB, in 1 dB step | Auto or manual setup |
Maximum Safe Input Level | Average Total Power | ≤ +33 dBm | Input attenuator |
DC Voltage | ± 50 V |
| |
1 dB Gain Compression | Total Power at 1st Mixer | > 0 dBm | Typical;Fc ≥ 50 MHz; preamp. off |
Total Power at the Preamp | > -22 dBm | Typical;Fc ≥ 50 MHz; preamp. on | |
| mixer power level (dBm)= input power (dBm)-attenuation (dB) | ||
Displayed Average Noise Level (DANL) | Preamp off | 0 dB attenuation; RF Input is terminated with a 50Ω load. RBW 10 Hz; VBW 10 Hz; span 500 Hz; reference level = -60dBm; trace average ≥ 40 | |
9 kHz to 100 kHz | < -93 dBm | Nominal | |
100 kHz to 1 MHz | < -90 dBm - 3 x (f/100 kHz) dB | ||
1 MHz to 2.7 GHz | < -122 dBm | ||
2.7 GHz to 3.25 GHz | < -116 dBm | ||
Preamp on | 0 dB attenuation; RF Input is terminated with a 50Ω load ; RBW 10 Hz; VBW 10Hz; span 500 Hz; reference level = -60dBm; trace average ≥ 40 | ||
100 kHz to 1 MHz | < -108 dBm - 3 x (f/100 kHz) dB | Nominal | |
1 MHz to 10 MHz | < -142 dBm | ||
10 MHz to 3.25 GHz | < -142 dBm + 3 x (f/1 GHz) dB | ||
Level Display Range | Scales | Log, Linear |
|
Units | dBm, dBmV, dBuV, V, W |
| |
Marker Level Readout | 0.01 dB | Log scale | |
| 0.01 % of reference level | Linear scale | |
Level Display Modes | Trace, Topographic, Spectrogram | Single / split Windows | |
Number of Traces | 4 |
| |
Detector | Positive-peak, negative-peak, sample, normal, RMS(not Video), Average(EMI), Quasi-Peak(EMI) | Can be setup for each trace separately | |
Trace Functions | Clear & Write, Max/Min Hold, View, Blank, Average |
| |
Absolute Amplitude Accuracy | Absolute Point | Center=160 MHz ; RBW 10 kHz; VBW 1 kHz; span 100 kHz; log scale; 1 dB/div; peak detector; 23°C±1°C; Signal at Reference Level | |
Preamp off | ± 0.3 dB | Ref level 0 dBm; | |
Preamp on | ± 0.4 dB | Ref level -30 dBm; | |
Frequency Response | Preamp off | Attenuation: 10 dB; Reference: 160 MHz; 20 to 30°C | |
100 kHz to 2.0 GHz | ± 0.5 dB |
| |
2GHz to 3.25 GHz | ± 0.7 dB |
| |
Preamp on | Attenuation: 0 dB; Reference: 160 MHz; 20 to 30°C | ||
1 MHz to 2 GHz | ± 0.6 dB |
| |
2 GHz to 3.25 GHz | ± 0.8 dB |
| |
Attenuation Switching Uncertainty | Attenuator setting | 0 to 50 dB in 1 dB step |
|
Uncertainty | ± 0.25 dB | reference: 160 MHz, 10dB attenuation | |
RBW Filter Switching Uncertainty | 1 Hz to 1 MHz | ± 0.25 dB | reference : 10 kHz RBW |
Level Measurement Uncertainty | Overall Amplitude Accuracy | ± 1.5 dB | 20 to 30°C; frequency > 1 MHz; Signal input 0 to -50 dBm; Reference level 0 to -50 dBm; |
± 0.5 dB | Typical | ||
Spurious Response | Second Harmonic Intercept |
| Preamp off; signal input -30dBm; 0 dB attenuation |
+35 dBm | Typical; 10 MHz < fc < 775 MHz | ||
+60 dBm | Typical; 775 MHz ≤ fc < 1.625 GHz | ||
Third-order Intercept |
| Preamp off; signal input -30dBm; 0 dB attenuation | |
> 1dBm | 300 MHz to 3.25 GHz | ||
Input Related Spurious | < -60 dBc | Input signal level -30 dBm, Att. Mode, Att=0dB; 20-30ºC | |
Residual Response (inherent) | <-90 dBm | Input terminated; 0 dB attenuation; Preamp off | |
Sweep | |||
Sweep Time | Range | 204 us to 1000 s | Span > 0 Hz |
50 us to 1000 s | Span = 0 Hz; Min Resolution = 10 us | ||
Sweep Mode | Continuous; Single |
| |
Trigger Source | Free run; Video; External |
| |
Trigger Slope | Positive or negative edge |
| |
RF Preamplifier | |||
| Frequency Range | 1 MHz to 3.25 GHz |
|
Gain | 18 dB | Nominal | |
| (installed as standard) | ||
Front Panel Input/Output | |||
RF Input | Connector Type | N-type female |
|
Impedance | 50 ohm | Nominal | |
VSWR | <1.6 :1 | 300 kHz to 3.25 GHz; Input attenuator ≥ 10 dB | |
Power for Option | Connector Type | SMB male |
|
Voltage/Current | DC +7V / 500 mA max | With short-circuit protection | |
USB Host | Connector Type | A plug |
|
Protocol | Version 2.0 | Supports Full/High/Low speed | |
MicroSD Socket | Protocol | SD 1.1 |
|
Supported Cards | microSD, microSDHC | Up to 32GB capacity | |
Rear Panel Input/Output | |||
Reference Output | Connector Type | BNC female |
|
Output Frequency | 10 MHz | Nominal | |
Output Amplitude | 3.3V CMOS |
| |
Output Impedance | 50 ohm |
| |
Reference Input | Connector Type | BNC female |
|
Input Reference Frequency | 10 MHz |
| |
Input Amplitude | -5 dBm to +10 dBm |
| |
Frequency Lock Range | Within ± 5 ppm of the input reference frequency |
| |
Alarm Output | Connector Type | BNC female | Open-collector |
Trigger Input/ Gated Sweep Input | Connector Type | BNC female |
|
Input Amplitude | 3.3V CMOS |
| |
Switch | Auto selection by function |
| |
LAN TCP/IP Interface | Connector Type | RJ-45 |
|
Base | 10Base-T; 100Base-Tx; Auto-MDIX | ||
USB Device | Connector Type | B plug | For remote control only; supports USB TMC |
Protocol | Version 2.0 | Supports Full/High/Low speed | |
IF Output | Connector Type | SMA female |
|
Impedance | 50 ohm | Nominal | |
IF Frequency | 886 MHz | Nominal | |
Output level | -25 dBm | 10 dB attenuation; RF input: 0 dBm @ 1 GHz | |
Earphone Output | Connector Type | 3.5mm stereo jack, wired for mono operation | |
Video Output | Connector Type | DVI-I ( integrated analog and digital) , Single Link. Compatible with VGA or HDMI standard through adapter | |
RS232 Interface | Connector Type | D-sub 9-pin female | Tx,Rx,RTS,CTS |
GPIB Interface (Optional) | Connector Type | IEEE-488 bus connector |
|
AC Power Input | Power Source | AC 100 V to 240 V, 50 / 60 Hz Auto range selection | |
Battery Pack (Optional) | Battery pack | 6 cells, Li-Ion rechargeable, 3S2P | With UN38.3 Certification |
Voltage | DC 10.8 V |
| |
Capacity | 5200 mAh / 56Wh |
| |
General | |||
| Internal Data storage | 16 MB nominal |
|
Power Consumption | <65 W |
| |
Warm-up Time | < 30 minutes |
| |
Temperature Range | +5 °C to +45 °C | Operating | |
-20 °C to + 70 °C | Storage | ||
Weight | 4.5 kg (9.9 lb) | Inc. all options (Basic+TG+GPIB+Battery) | |
Dimensions | 210 x 350 x 100 (mm) | Approximately | |
| 8.3 x 13.8 x 3.9 (in) |
|
- For the Quick Check and Analysis of Spectral Characteristic
- EMI Pre-compliance Testing
- Analyze ASK, FSK, AM, FM Signal Characteristics
- Monitor Satellite Uplink Signals From Satellite Uplink Truck
- Test Systems That Require a Very Compact Instrument
- Measure the Frequency Response of Cable, Filter and Amplifier Attenuator