Fluke Calibration 700HPP 3000 PSIG High Pressure Pneumatic Test Pump

Fluke Calibration
Fluke Calibration

Key Features:

  • Generate and adjust pneumatic pressures up to 3000 PSIG (21 MPa)
  • Rugged, portable, take it anywhere and use on any surface
  • Reaches full pressure in 20 seconds to full scale/li>
  • Detachable pressure adjustment system for adjusting pressure, connecting reference and test devices on bench and in the field, and isolating and venting pressure
  • Easily switch out reference gauges without requiring PTFE tape or tools
  • 2-meter (6.5-foot) pressure line and assorted pressure fittings
  • In-line filter and desiccant systems protect device from contamination from the DUT

Secured and trusted checkout with

Fluke Calibration introduces the 700HPP Pneumatic Test Pump, a rugged, portable tool that generates and adjusts pneumatic pressures up to 3000 PSIG without requiring a nitrogen bottle or other external pressure supplies. It is the ideal solution for generating high pressure in the field to devices under test (DUTs).

The 700HPP reaches pressure in 20 seconds to full scale into a 30 cm3 volume. A detachable pressure adjustment system and adjustment control knob allows technicians to make fine pressure adjustments to 0.05% of reading or better.

The lightweight and portable pneumatic pressure kit is designed for use in the lab or the field with collapsible feet, a built-in handhold, and a canvas carrying case making it easy to carry to the field. In-line filter and desiccant systems protect the device against con­tamination from the DUT. And it works on almost any surface, so technicians don’t need a flat laboratory bench or flat area in the field.


  • • Pump
  • • Canvas Carrying Bag
  • • High Pressure Pneumatic Quick Service Kit (Seals for Pump)
  • • Dry Pac Refill
  • • Silicone Grease
  • • High Pressure Hose
  • • Test Port Adapters
 Fluke 700HPP Technical Specifications



Maximum working pressure

3000 PSIG
21 MPa

Time to generate full scale pressure with 10 cc volume (s)

20 Strokes


5.5 kg (12.2 lbs.)

7.2 kg (15.8 lbs.)

Reference gauge connection

¼" NPT, quick connect

Inlet supply contamination protection

Desiccant filter

DUT contamination protection filter


100 micron

Fine adjustment resolution


0.05% rdg

Maximum leak rate (with isolation valve closed)


0.01% rdg


66 cm x 25 cm x 13 cm (26 in x 10 in x 5 in)

66 cm x 30.5 cm x 13 cm (26 in x 12 in x 5 in)

Supplied test port adapters


NPT: 1/8, ¼ NPT
BSP: 1/8, ¼ BSP
MET: M14, M20, ¼ NPT

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

Products In This Series