Skip to the beginning of the images gallery

Fluke Calibration 3130 Portable Pressure Calibrator

Be the first to review this product

SKU

3130-G2M

Manufacturer:

Fluke Calibration

Key Features:

Measure and generate pressures from vacuum to 2 MPa (300 psi, 20 bar)
Internal pump can generate vacuum to -80 kPa (-12 psi, -0.8 bar) or pressure to 2 MPa (300 psi, 20 bar)
Supply pressure connection allowing the use of external gas supply up to 2 MPa (300 psi, 20 bar)
Includes variable volume for fine adjustment of pressures
Pressure measurement accuracy of 0.025 % reading ± 0.01 % FS
Electrical measurement and 24 volt supply for close looped calibrations
Measure or generate 4 to 20 mA
Measure 0 to 30 V dc
Powered by internal, rechargeable, high capacity NiMH battery or universal ac mains adapter
Compatible with Fluke 700P and 750P Pressure Modules

Product Options:

Fluke Calibration 3130-G2M Calibration Options

None

Standard Calibration Certificate + $250.00

ISO 17025 Accredited Calibration Certificate + $325.00

Ship to

Calculate Shipping Cost

Country

State/Province

Zip/Postal Code

Qty

$7,629.65

Secured and trusted checkout with

Product Detail

The Fluke Calibration 3130 is built into a rugged case with internal storage for power supply, test leads, and fittings. In addition, it includes a rechargeable, NiMH battery, allowing for approximately 50 hours of operation. When using the internal pump, the battery is sufficient to provide up to 100 calibration cycles to 300 psi. The battery is recharged by simply plugging the unit in using the included universal mains adapter.

Short Description

Environmental
Operating temperature	-10 °C to +50 °C
Storage temperature	-20 °C to +60 °C
Power requirements	12 V dc (Universal ac adapter/charger supplied)
Battery	Internal 3800 mAh advanced NiMH pack
Operating time
On full charge	Approx 50 hours (Measure only or external air; no pump)
Using internal pump	Approx 100 calibration cycles to 300 psi
Physical
Dimensions	15.25 in L x 12 in W x 7 in D
Weight	~7 kg (15 lb)
EMI/RFI conformance	EN61326:2006 Annex A
Connectors/ports	1/8 in NPT (External supply port and test port)
Included accessories	Manual, NIST-traceable certificate, test leads, universal ac adapter/charger
Ranges
Pressure (internal pump)	-80 kPa to 2 MPa (-12 to 300 psi, -0.8 to 20 bar)
Pressure (external air)	0 to 2 MPa (0 to 300 psi, 0 to 20 bar)
mA	0 to 24.000 mA
Volts	0 to 30.000 V dc
Engineering units	psi, bar, mbar, kPa, MPa, kgf/cm2, mmH2O @ 4 °C, mmH2O @ 20 °C, cmH2O @ 4 °C, cmH2O @ 20 °C, inH2O @ 4 °C, inH2O @ 20 °C, inH2O @ 60 °F, mmHg @ 0 °C, inHg @ 0 °C
Instrumental measurement uncertainty
Pressure	0.025 % of reading ± 0.01 % FS
mA	0.015 % of reading ± 0.002 mA
Volts	0.015 % of reading ± 0.002 V
Temperature effect (all functions)
No effect on accuracy on all functions from 15 °C to 35 °C
Add ± 0.002 % F.S./°C for temps outside of 15 °C to 35 °C