We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and the wireless data logging capabilities of Fluke Connect® with ShareLive™ video call, process technicians can now do a lot more while carrying a lot less. And with its built-in, selectable 250 ohm HART® resistor, it eliminates the need to carry a separate resistor with you.
Use the included FC Connector with the Fluke 789 and get the full benefits of the Fluke Connect® app. Download it now and get started.
Fluke 789 ProcessMeter™ with Fluke Connect®
Specifications | |||||||||||||||||||||||
Current measurement | Range | 0-1 A AC or DC | |||||||||||||||||||||
Resolution | 1 mA | ||||||||||||||||||||||
Accuracy | 0.2% + 2 LSD (DC) | ||||||||||||||||||||||
Range | 0-30 mA | ||||||||||||||||||||||
Resolution | 0.001 mA | ||||||||||||||||||||||
Accuracy | 0.05% + 2 lSD | ||||||||||||||||||||||
Current sourcing | Range | 0-20 mA or 4-20 mA | |||||||||||||||||||||
Resolution | 0.05% of span | ||||||||||||||||||||||
Drive capability | 24 V Compliance or 1200 Ω @ 20 mA | ||||||||||||||||||||||
Frequency | to 19.999 kHz, 0.005% + 1 LSD | ||||||||||||||||||||||
Continuity | Beeps for resistance < 100 Ω | ||||||||||||||||||||||
Voltage measurement | Range | 0-1000 V AC (true-rms) or DC | |||||||||||||||||||||
Resolution | 0.1 mV to 1.0 V | ||||||||||||||||||||||
Accuracy | 0.1% Rdg + 1 LSD (VDC) | ||||||||||||||||||||||
Resistance measurement | to 40 MΩ, 0.2% + 1 LSD | ||||||||||||||||||||||
Diode test | 2.0 V shoes diode voltage drop | ||||||||||||||||||||||
Display current and % of span | Yes | ||||||||||||||||||||||
Auto Step, Auto Ramp | Yes |
Environmental Specifications | ||
Operating temperature | -20 ºC to 55 ºC | |
Storage temperature | -40 ºC to 60 ºC | |
Humidity (without condensation) | 95% up to 30 ºC 75% up to 40 ºC 45% up to 50 ºC 35% up to 55 ºC | |
Temperature coefficient | 0.05 x (specified accuracy) per ºC (for temperatures < 18 ºC or > 28 ºC) |
Safety Specifications | ||
Electrical safety | Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92 | |
Overvoltage category | IEC 1010-1 CAT III 1000 V IEC 1010-1 CAT IV 600 V | |
Maximum voltage | 1000 V rms |
Mechanical and General Specifications | |
Size | 50 x 100 x 203 mm (1.25" H x 3.41"W x 7.35" L) |
Weight | 610 g (1.6 lbs) |
Batteries | 4 AA alkaline batteries |
Warranty | 3 years |
Battery life | 140 hours typical (measurement), 10 hours typical (sourcing 20 mA) |
Shock and vibration | Random, 2 g, 5-500 Hz 1 meter drop test |
Fluke t3000 FC Wireless K-Type Temperature Module
General Specifications | |||
Range K-type | -200 °C to 1372 °C | ||
Resolution | 0.1 °C | ||
Accuracy | ± [0.5 % + 0.5 °C] counts | ||
Input terminals | K-type mini | ||
LCD w/backlight | 3 ½ digits | ||
Log rate/interval | 1 sec minimum/adjustable by PC | ||
Battery type | 2 AA, NEDA 15 A, IEC LR6 | ||
Battery life | 400 hours | ||
Memory | Record up to 65,000 readings | ||
RF communications | 2.4 GHZ ISM Band | ||
RF communication range | Open air, unobstructed: Up to 20 m Obstructed, sheetrock wall: Up to 6.5 m Obstructed, concrete wall or steel electrical enclosure: Up to 3.5 m | ||
Operating temperature | -10 °C to +50 °C | ||
Storage temperature | -40 °C to +60 °C | ||
Temperature coefficient | 0.01 % of reading +0.03 °C per °C | ||
Temperature scale | ITS-90 | ||
Operating humidity | 90 % at 35 °C, 75 % at 40 °C, 45 % at 50 °C | ||
Altitude | Operating: 2,000 m Storage: 12,000 m | ||
EMC | EN 61326-1:2006 | ||
Safety compliance | IEC 61010-1, CAT I, 3rd edition Pollution Degree 2 | ||
Certifications | CSA, CE, FCC: T68-FBLE IC: 6627A-FBLE | ||
Ingress Protection (IP) rating | IP42 | ||
Pollution Degree | 2 | ||
Size (HxWxD) | 16.5 cm x 6.35 cm x 1.4 cm (6.5 in x 2.5 in x 1.4 in) | ||
Weight | .22 kg (8 oz) | ||
Warranty | Three years |
Note: Not compatible with Fluke CNX test tools
Includes:
- • Fluke 789 ProcessMeter
- • Fluke t3000 FC Wireless K-Type Temperature Module
- • Fluke ir3000 FC Connector
- • TL71 Premium Test Lead Set
- • AC72 Alligator Clips
- • Four (4) AA alkaline batteries (installed)
- • Users' manual
- • Quick reference guide