We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Flowline Switch-Tek LZ12 provides reliable liquid level detection of dirty liquids such as those with light to medium coating, scaling or foaming characteristics with a 1A relay output. Media examples include waste-water, diluted caustic soda and light weight oil. For optimum performance, the liquid level switch automatically adjusts for coating build up, and if necessary, outputs a proactive maintenance alarm to request cleaning. The submersible Ryton® liquid level sensor is universally mounted through the tank wall or inside the tank as a high level alarm or low level alarm.
Orientation: | Universal |
Accuracy: | ± 1mm in water |
Repeatability: | ± 0.5mm in water |
Supply voltage: | 12-28 VDC |
Consumption: | 25 mA maximum |
Contact type: | (1) SPST relay |
Contact rating: | 60 VA, 1A maximum |
Contact output: | Selectable NO / NC |
Maint. alarm: | NPN transistor, 10 mA maximum |
Process temp.: | F: -40° to 176° C: -40° to 80° |
Pressure: | 150 psi (10 bar) @ 25º C., derated @ 1.667 psi (0.113 bar) per ºC. above 25º C. |
Sensor rating: | NEMA 6 (IP68) |
Sensor material: | Ryton® |
Grommet mat.: | Viton® |
Cable jack. mat.: | PP |
Cable type: | 5-conductor, shielded |
Cable length: | 10' (3m) |
Process mount: | 3/4" NPT (3/4" G) |
Mount. gasket: | Viton® |
Classification: | General purpose |
Compliance: | CE |
Dimensions
Write Your Own Review