We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Flowline Switch-Tek LP15 general purpose guard capacitance point level switch provides reliable high or low liquid level detection of water based conductive liquids with light coating, crystallizing or scaling characteristics with a 1A relay output. Media examples include copper sulfate and brine. The RF guard circuit eliminates the coating signal path between the active and reference electrodes. The submersible polypropylene liquid level sensor is universally mounted through non-metallic tank walls or inside the tank as a high level alarm or low level alarm.
| Orientation: | Universal |
| Accuracy: | ± 1mm in water |
| Repeatability: | ± 0.5mm in water |
| Dielectric range: | > 20 constants |
| Conductive range: | > 100 µ |
| Supply voltage: | 12-36 VDC |
| Consumption: | 25 mA maximum |
| Contact type: | (1) SPST relay |
| Contact rating: | 60 VA, 1A maximum |
| Contact output: | Selectable NO / NC |
| Process temp: | F: -40° to 176° C: -40° to 80° |
| Pressure: | 150 psi (10 bar) @ 25º C, derated @ 1.667 psi (0.113 bar) per ºC above 25º C |
| Sensor rating: | NEMA 6 (IP68) |
| Sensor material: | Polypropylene |
| Cable jack. mat.: | Polypropylene |
| Cable type: | 4-conductor, shielded |
| Cable length: | 10' (3m) |
| Process mount: | 3/4" NPT (3/4" G) |
| Mount. gasket: | Viton® |
| Classification: | General purpose |
| Compliance: | CE |
Dimensions
Write Your Own Review