We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The Flowline EchoPod UG06 provides continuous level measurement up to 19.6’ (6m) with a 4-20 mA analog signal output. The UG06 is configured via Flowline's integral push button display module or WebCal software.
Range: 8” to 19.6’ (20cm to 6m)
Accuracy: ± 0.2% of range
Resolution: 0.079” (2mm)
Dead band: 8” (20.3cm)
Beam width: 3” (7.6cm)
Configuration: Push button or WebCal® PC Windows® USB® 2.0
Memory: Non-volatile
Display type: LCD, 6-digit
Display units: Inch, cm or percent
Supply voltage: 14-28 VDC
Max. consumption: 0.5W
Loop resistance: 500 ohms @ 24 VDC
Signal output: 4-20mA, two-wire
Signal invert: 4-20mA or 20-4mA
Signal fail-safe: 4mA, 20mA, 21mA, 22mA, hold last
Process temp.: F: -40º to 176º, C: -40º to 80º
Temp. comp.: Automatic
Ambient temp.: F: -31º to 140º, C: -35º to 60º
Pressure: 30 psi (2 bar)
Enclosure rating: Type 6P (IP68)
Encl. material: Polypropylene
Encl. cap material: Clear polycarbonate
Enclosure vent: Water tight membrane
Conduit entrance: 1/2” NPT
Transducer type: Reflective
Transducer mat.: Polyvinylidene fluoride
Process mount: -0001: 2” NPT, -0011: 2” G
Mount gasket: -0001: N/a, -0011: Viton®
Classification: General purpose
Approval (pending): UL 61010-1
Compliance: CE, RoHS
Write Your Own Review
- Bulk storage
- Day tank
- Neutralization tank
- Clarifier
- Waste sumps