We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Flowline EchoPod DX10 provides continuous level measurement up to 49.2" (1.25m) with a selectable 0-5 VDC, 0-10 VDC or 976-2000 Hz frequency signal output, and is configured via our free WebCal software. Select the voltage output for interface with analog input cards. Select the frequency output for interface with discrete input cards. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is widely selected for small day tank, skid, IBC, sump and process tank level applications.
| Range: | 49.2" (1.25m) |
| Accuracy: | 0.125" (3mm) |
| Resolution: | 0.019" (0.5mm) |
| Dead band: | 2" (5cm) |
| Beam width: | 2" (5cm) |
| Configuration: | WebCal® PC Windows® USB 2.0 USB 2.0 |
| Memory: | Non-volatile |
| Supply voltage: | 12-28 VDC |
| Consumption: | 0.5W |
| Signal output: | 0-5 V, 0-10 V, 976-2000 Hz |
| Frequency: | Sink current, 15 mA nominal |
| Signal invert: | 5-0 V, 10-0 V, 2000-976 Hz |
| Signal fail-safe: | Full, empty or hold last |
| Process temp.: | F: 20° to 140° C: -7° to 60° |
| Temp. comp.: | Automatic |
| Ambient temp.: | F: -31° to 140° C: -35° to 60° |
| Pressure: | MWP = 30 PSI (2 bar) |
| Enclosure rating: | Type 6P, encapsulated, corrosion resistant & submersible |
| Encl. material: | Polycarbonate |
| Strain relief mat.: | Santoprene |
| Trans. material: | PVDF |
| Cable jacket mat.: | Polyurethane |
| Cable type: | 6-conductor, shielded |
| Cable length: | 48" (1.2m) |
| Process mount: | 1" NPT (1" G) |
| Mount gasket: | Viton® |
| Classification: | General purpose |
| Compliance: | CE, RoHS |
| Approvals: | cFMus |
Write Your Own Review