We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Flowline EchoPod DL10 provides continuous level measurement up to 49.2" (1.25m) with a 4-20 mA signal output, and is configured via our free WebCal software. This non-contact liquid level sensor is ideally suited for corrosive, sticky or dirty liquids, and is broadly selected for small day tank, skid, IBC, sump and process tank level applications.
Range: | 49.2" (1.25m) |
Accuracy: | 0.125" (3mm) |
Resolution: | 0.019" (0.5mm) |
Dead band: | 2" (5cm) |
Beam width: | 2" (5cm) |
Configuration: | WebCal® PC Windows® USB 2.0 USB 2.0 |
Memory: | Non-volatile |
Supply voltage: | 24 VDC (loop) |
Consumption: | 0.5W |
Loop resist.: | 400Ω max |
Signal output: | 4-20 mA, two-wire |
Signal invert: | 4-20 mA or 20-4 mA |
Signal fail-safe: | 4 mA, 20 mA, 21 mA, 22 mA or hold last |
Process temp.: | F: 20° to 140° C: -7° to 60° |
Temp. comp.: | Automatic |
Ambient temp.: | F: -31° to 140° C: -35° to 60° |
Pressure: | MWP = 30 PSI (2 bar) |
Enclosure rating: | Type 6P, encapsulated, corrosion resistant & submersible |
Encl. material: | Polycarbonate |
Strain relief mat.: | Santoprene |
Trans. material: | PVDF |
Cable jacket mat.: | Polyurethane |
Cable type: | 4-conductor, shielded |
Cable length: | 48" (1.2m) |
Process mount: | 1" NPT (1" G) |
Mount gasket: | Viton® |
Classification: | General purpose |
Compliance: | CE, RoHS |
Approvals: | cFMus |
Write Your Own Review