We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The FLIR VP50-2 non-contact voltage detector is used to check if an AC circuit is live before beginning work. The VP50-2 detects voltage on exposed conducting parts or through insulation and identifies live wires within electrical panels, switches, and outlets.
| Alarm Notification | Sound, Flashing LED, Vibration |
| Flashlight | Yes |
| Tip Light | Yes |
| Drop test | 3 m (9.8 ft) |
| Category Rating | CAT IV-1000 V |
| Certifications | cULus |
| Warranty | Limited 3-year |
| Measurement & Analysis | |
| AC Voltage Range | 90 to 1000 V AC (default, solid green light) |
| Category Rating | CAT IV-1000 V |
| Frequency Range | 45 to 65 Hz |
| High Sensitivity Mode | 24 to 1000 V AC (solid amber light) |
| Vibrating Indication | Yes |
| Environmental & Certifications | |
| Ambient temperature range for operation | -10 to 50°C (14 to 122°F) |
| Certifications | cULus |
| Drop test | 3 m (9.8 ft) |
| Storage Temperature | -20 to 60°C (-4 to 140°F) |
| Warranty | Limited 3-year |
| General | |
| Alarm Notification | Sound, Flashing LED, Vibration |
| Dimensions (L x W x H) | 158.5 x 26 × 29 mm (6.24 x 1.02 x 1.14 in) |
| Flashlight | Yes |
| Tip Light | Yes |
| Weight | 59 g (2.1 oz) including batteries |
| Power | |
| Battery Life | ~5 hours continuous (flashlight off) |
| Power Requirements | 2 × AAA alkaline batteries |
Write Your Own Review