Toggle Nav
My Quote
Menu
Account
pdf
FLIR DM286 Industrial Thermal Imaging Multimeter with IGM

FLIR DM286 Industrial Thermal Imaging Multimeter with IGM

Be the first to review this product
SKU
DM286
Manufacturer:
FLIR
FLIR

Key Features:

  • 6000-count 2.8 in. (7.1 cm) digital TFT display
  • Built-in IGM Infrared imager (120 x 160 pixels) with laser pointer and crosshair targeting
  • Capture fully radiometric thermal images
  • Bluetooth METERLiNK connectivity for sharing images, video, and data log files with mobile devices
  • Measures Voltage, Current (A, mA, μA), Frequency, Resistance/Continuity, Diode, Capacitance, and Temperature
  • Built-in non-contact voltage detector (NCV)
  • Customizable via easy-to-use menu system
  • Data logger stores up to 40,000 readings
  • Gallery mode for displaying stored images/video and data log files
  • Automatic and Manual ranging
  • Input over-voltage warning
  • MIN-MAX-AVG memory
  • PEAK MIN and PEAK MAX AC V and AC mV measurements
  • Flex Clamp direct input
  • On-screen programming menu navigation
  • Variable-frequency drive VFD mode (low-pass filter)
  • Low-Z (low impedance) mode
  • Relative mode
  • Data Hold
  • Auto Power OFF for meter and worklight separately
  • Safety Category Rating: CAT IV-600V, CAT III-1000V.
  • Equipped with two TA04 rechargeable batteries, CAT IV-600V test leads, CAT IV-600V alligator clips, Type-K thermocouple (-22 to 500 F [-30 to 260 C]) with adapter, USB cable, storage pouch, warranty card, and Quick Start booklet.
Product Options:
Ship to USCalculate Shipping Cost
$929.00

Secured and trusted checkout with

The FLIR DM286 is an industrial thermal imaging multimeter with Infrared Guided Measurement (IGM) and Multi-Spectral Dynamic Imaging (MSX). The DM286 allows you to safely identify where hazards might be before contact is ever made. This multimeter is able to capture and store up to 30,000 images and 100 log files, with the ability to record thermal and visual video clips.

IR Resolution160 × 120 (19,200 pixels)
Display Counts6000
AC/DC Voltage1000 V AC RMS ±(1.0％＋3) 1000 V DC ±(0.09%+3)
AC/DC Amps10.00 A AC RMS ±(1.5%+3) 10.00 A DC ±(1.0%+3)
ConnectivityBluetooth BLE
 
Imaging & Optical
Color PalettesIron, rainbow, arctic, white hot, and black hot
Field of view - visual71° × 56°
FocusFixed
Frame Rate9 Hz

Image Modes		Thermal MSX (Multi Spectral Dynamic Imaging)
Thermal Camera only
Digital Camera only
IR Resolution160 × 120 (19,200 pixels)
IR Sensitivity150 mK (0.15°C)
Spectral Response8–14 µm
Thermal Imaging DetectorFLIR Lepton® microbolometer
Visual Focus and FOVFixed focus, 71° × 56° FOV
Visual Resolution2 MP (1600 × 1200 pixels)
 
Measurement & Analysis
AC/DC Amps10.00 A AC RMS ±(1.5%+3) 10.00 A DC ±(1.0%+3)
AC/DC LoZ V1000 V AC RMS or 1000 V DC ±(1.3%+4)
AC/DC mVoltAC 600.0 mV ±(1.0％＋3) DC 600.0 mV±(0.2%+3)
AC/DC Voltage1000 V AC RMS ±(1.0％＋3) 1000 V DC ±(0.09%+3)
Calibration CycleOnce per year, recommended
Capacitance10.00 mF ±(4.0%+5)
Contact Temperature Type K thermocouple-40°C to 400°C DMM ± (1.0% + 3°C) / IGM ± (1.0% + 5°C)
(-40°F to 752°F DMM ± (1.0% + 5.4°F) / IGM ± (1.0% + 9°F)
Continuity check threshold10–100Ω
Diode Test1.500 V ± 0.9%
Display Counts6000
Frequency Counter100.00 kHz ±(0.1%+5)
Measuring Rate3 samples per second
Resistance6.000 MΩ ±(0.9%+5), 60.00 MΩ ±(3.0%+5)

Temperature Accuracy		±3°C (5.4°F) or ± 3% of the reading (whichever is greater) for temperatures > 25°C (77°F) ±5°C for temperatures -10°C to 25°C (14°F to 77°F)
Temperature Range–5°C to 300°C (23°F to 572°F)
Temperature Resolution0.1°C (0.1°F)
Thermal Sensitivity150 mK (0.15°C)
VFDAC V: 1000 V AC RMS, ±(1.3%+4) at 45∽65 Hz
 
Communication & Data Storage
ConnectivityBluetooth BLE
Image File FormatRadiometric
Storage40,000 readings per memory set
Storage MediaeMMC 4GB
Stored Image Capacityup to 30,000
Video Recording50 minutes maximum duration
20 seconds max duration for file transmission
 
User Interface
Display2.8"
Display BrightnessHigh, Medium, Low
 
Power
Auto Power OffFor Meter: set to OFF, 2, 5, or 10 minutes
For Worklight only: set to OFF, 5, 15, or 30 minutes
BatteryTA04, Lithium Polymer Rechargeable, 3050 mAh. Two supplied.
Battery LifeApprox. 6.5 hours in IGM mode with display brightness set to medium.
Approx. 10 hours in Multimeter mode (medium brightness)
Non_Contact Voltage Detector [NCV]Yes
 
General
Dimensions (L x W x H)20 cm × 9.6 cm × 5.6 cm (7.9 in × 3.8 in × 2.2 in)




Included		1 x DM286 Industrial Thermal Imaging Multimeter
1 set of CATIV 600V Test Lead
1 set of CATIV 600V Alligator Clip
1 x Type-A to Micro-USB Cable (with Data transfer capability)
1 x K-type Thermocouple (-30°C to 260°C)
1 x Soft-sided carrying case
1 x FLIR Quick Start Guide
1 x FLIR Warranty Card
2 x TA04 Rechargeable Battery Cell
Weight569 g (1.25 lb) without battery (approx.)
Worklightsx1 LED
 
Environmental & Certifications
CertificationsETL, FCC, CE, RCM, UKCA, FDA, EN60825, EN50689
Drop test2 m (6.6 ft)
EMCEN61326-1
Emissivity Settings0.10 to 1.00 (default is 0.95); select from four presets or set manually.
IP RatingIP40
Laser Pointer Power≤0.39 mW
Laser TypeClass I (red)
Laser Wavelength640 nm to 660 nm
Operating Altitude2000 m (6560 ft)

Operating Temp & Humidity		-10°C to 30°C (14°F to 86°F), <85% RH
30°C to 40°C (86°F to 104°F), <75% RH
40°C to 50°C (104°F to 122°F), <45% RH
Pollution Degree2.0
SafetyIEC 61010-1 CAT IV - 600 V, CAT III - 1000 V
Storage temperature and relative humidity [RH]-20°C to 60°C (-4°F to 140°F), 0–80% RH (without batteries)
WarrantyLimited 10-Year Warranty
 
Accessories
SoftwareFLIR METERLiNK® app

 

Data Sheet

FLIR DM286 Data Sheet

Manuals

FLIR DM286 User Manual

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
  • • Identifying hot spots in electrical components
  • • Diagnosing intermittent electrical problems
  • • Data logging and tracking changes in electrical systems

    No accessories available