We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
*Modules not included
The BK Precision DAS1800-BAT is able to measure and record at the same time up to 40 channels at 1 MSa/s/ch and stream the data directly to the solid-state drive. For the slow changing parameters, the D18-MUX8 multiplexed module provides 8 inputs per module (up to 80 channels per system). The DAS1800-BAT includes the DAS1800 base unit with a non-removeable Lithium-ion battery providing up to 3 ½ hours of continuous use.
Base Unit
Note: All specifications apply to the unit after a temperature stabilization time of 60 minutes over an ambient temperature range of 23 °C ± 5 °C.
Data Acquisition System | ||
Recording (files written to SSD) | ||
Max Sampling Rate1 | 1 MSa/s up to 40 channels | |
Recording Groups | 4 | |
Write Speed | 120 MB/s (7 GB/min) | |
File Format | ASAM MDF4 (.mf4) | |
File Size Limit | 90% of disk capacity | |
At End of Acquisition | Notify, rearm trigger | |
Real Time Measure | ||
Display Mode | F(t) | Roll mode: 100 ms/div to 10 min/div Scope mode: 10 μs/div to 50 ms/div |
DMM | Acquisition time: 200ms (10 NPLC2 at 50Hz), 2s (100 NPLC2 at 50Hz) | |
Record live view | Typical Refresh period 2s, Zoom Mode | |
Custom | 2 Customizable Views Widgets: F(t), RecLive F(t), DMM, Picture | |
File Viewer | ||
Open File Time (typical) | 10 sec per 100 GB of file | |
Subplot | 16 | |
Cursors | Horizontal, vertical | |
Measurements | On the data displayed or between cursors | |
Min, Max, Pk to Pk, Frequency, RMS, Rising time | ||
Trigger System | ||
Compute Period | 1 μs | |
Source | Analog channel, external source, manual, date/time, delay (on start), duration (on stop), AND/OR combination of channels (128 max) | |
On Analog Channel | Edge (rising, falling, both), Threshold (above, below), windows (in, out) | |
Pre-trigger | 128 Msamples | |
Post-trigger | 1000 s maximum |
Digital I/O | |
Input | |
Number of Channels | 16 |
Max Voltage | 24 V |
Threshold | 1.2 V to 2.8 V |
Sampling Interval | 1 μs (1 MSa/s) each channel |
Output | |
Number of Channels | 4 |
Output Characteristics | TTL 5 V, 10 mA |
Trigger Source | Analog/Digital channels, acquisition start/stop, disk full |
Power Supply3 | + 12 V ± 5 %, 200 mA |
(1) For D18-UNI4 and D18-HIZ4 Module
(2) NPLC: Number of power line cycles
(3) Used to power the isolated digital input board
(4) Time with only the 1st frequency group used
Power Supply Outputs | |
Maximum Power Consumption | 5 W |
Output Characteristics | + 3.3 V ± 5%, 500 mA |
+ 5 V ± 5%, 500 mA | |
+ 12 V ± 5%, 400 mA | |
+ 24 V ±5 %, 200 mA |
Synchronization I/O | ||
On Synchronization Connector (SUB-D 15 HD pin) | ||
Input | Signal level | TTL 3.3 V |
External trigger | Pull-up resistor: 10 kΩ, Rising edge sensitive Minimum pulse width: 100 μs | |
External start/stop | Pull-up resistor: 10 kΩ, Rising edge sensitive for start Falling edge sensitive for stop Minimum pulse width: 500 ms | |
Output | Signal | TTL 3.3 V |
Trigger | 1 ms positive pulse at trig event | |
Start/stop | Set when record is launched |
Software Feature | ||
Remote Access | VNC for remote monitoring and control | |
Web server | ||
File management | FTP, SFTP | |
Bench automation | SCPI command port (23 or 5025) | |
Sensor Library | Predefined sensors and user created | |
Date and Time | Manual, NTP | |
Software Update | Through web or USB | |
Languages | English, French |
General | |
Internal Solid State Memory | 2 TB SSD 3D TLC NAND |
Operating Temperature | 0 °C to 40 °C (32 ºF to 104 ºF) |
Storage Temperature | -20 °C to 60 °C (-4 ºF to 140 ºF) |
Display | 15.6" TFT LCD full HD 1920x1080 |
Power Supply | 110 VAC to 240 VAC, 50 to 60 Hz (150 VA max) |
Interfaces | USB 3.0 (x2), USB 2.0 (x2) , LAN 1 Gbps (x1), HDMI (x1) |
Battery (optional) | Non removable, Lithium-ion |
Battery Life (typical) | 3 ½ hrs - One D18-UNI4 module installed 1 ½ hrs - Ten D18-UNI4 modules installed |
Weight | 15 lbs (6.8 kg) base unit + battery option 1.21 lbs (550 g) each module |
Safety | Low Voltage Directive (LVD) 2014/35/EU EN 61010-2010+A1:2019 |
Electromagnetic Compatibility | EMC directive 2014/53/EU EN IEC 61326-1 (2021) EN 61000-3-2 (2019+A1/2021) EN 61000-3-3 (2013+A1/2019) |
Dimensions (W x H x D) | 19.1" x 11" x 7.9" (485 x 280 x 200 mm) |
Warranty | 3 Years |
Supplied Accessories | Power cord, SUB-D 25 pin male connector and back shell, SUB-D 15 HD pin male connector and back shell, 8 pin connector, rugged carrying case |
- • Measure and record up to 80 analog channels
- • Monitoring of processes and equipment
- • Product validation and verification
Products In This Series
As low as
Now $12,990.00