We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The BA6011 Battery Analyzer from BK Precision measures voltage and resistance of modern battery technologies with superior accuracy, resolution, and speed. Users can also carry out measurements like inductance, capacitance, dissipation factor, impedance, quality factor, reactance, and phase angle in degrees and radians.
The BA6011 is essential for characterizing battery chemistries that are responsive to a 1 kHz AC stimulus signal including lead acid, lithium and alkaline type batteries used in consumer products, electric vehicles, power backup, security, and fire alarm systems. The unit supports voltage measurements of battery packs up to 300 V.
All specifications apply to the unit after a temperature stabilization time of 15 minutes over an ambient temperature
range of 20 °C ± 5 °C. Specifications are subject to change without notice.
Model | BA6010, BA6011 | |
| Measurement Parameters | Main | V, R |
Auxiliary | L, C, D, Z, X, Q, θd, and θr | |
Test Frequency | 1 kHz ± 0.2 Hz | |
Display Resolution | 5 digits (SLOW & MED), 4 digits (FAST) | |
| SLOW, approx. 6.25 measurements/sec | |
Temperature | Voltage Meas. | 0.005 % / ºC |
Resistance Meas. | 0.05 % / ºC | |
Triggering | Internal, External, Manual, Bus | |
Delay Time | On / Off, 0 ms to 60 s | |
Averaging | 1 to 255 samples | |
| Valid data count, Invalid data count, Mean, Maximum, Minimum, Standard Deviation, Sample Standard Deviation, Process Capability Index (Dispersion), Process Capability Index (Deviation) | |
Voltage Measurement (BA6011) | |||
SLOW, MED | |||
Range | Maximum Display Value | Resolution | Accuracy |
30 V | 35.000 V | 1 mV |
|
300V | 310.00 V | 10 mV | |
FAST | |||
Range | Maximum Display Value | Resolution | Accuracy |
30 V | 35.00 V | 10 mV |
|
300 V | 310.0 V | 100 mV | |
Resistance Measurement | ||||
SLOW, MED | ||||
Range | Maximum Display Value | Resolution | Measurement Current | Accuracy |
30 mΩ | 33.000 mΩ | 1 µΩ | 100 mA (± 10 %) |
|
300 mΩ | 330.00 mΩ | 10 µΩ | 100 mA (±10 %) | |
3 Ω | 3.3000 Ω | 100 µΩ | 10 mA (± 10 %) | |
30 Ω | 33.000 Ω | 1 mΩ | 1 mA (± 10 %) | |
300 Ω | 330.00 Ω | 10 mΩ | 100 µA (± 10 %) | |
3 kΩ | 3.5000 kΩ | 100 mΩ | 10 µA (± 10 %) | |
FAST | ||||
Range | Maximum Display value | Resolution | Measurement Current | Accuracy |
30 mΩ | 33.00 mΩ | 10 µΩ | 100 mA (± 10 %) |
|
300 mΩ | 330.0 mΩ | 100 µΩ | 100 mA (± 10 %) | |
3 Ω | 3.300 Ω | 1 mΩ | 10 mA (± 10 %) | |
30 Ω | 33.00 Ω | 10 mΩ | 1 µA (± 10 %) | |
300 Ω | 330.0 Ω | 100 mΩ | 100 µA (± 10 %) | |
3 kΩ | 3.500 kΩ | 1 Ω | 10 µA (± 10 %) | |
| Accuracy of Auxiliary Measurement Parameters | |
| L, C, D, Z, X, Q, θd, and θr | 5 % typical** |
** see user manual for more details
Bin Comparator Function | ||
Limit Setting Mode | Tolerance (TOL) or Absolute (ABS) value | |
Number of Bins | 9 sorting bins BIN1-BIN9 | |
Beep Warning | OFF, PASS, FAIL | |
Trace Function | ||
Total Time | 1 s - 99999 s | |
Sampling Interval | 1 s - 86400 s | |
General | ||
Save/ | Instrument Settings | |
Save / Recall | Internal or External Memory: Up to 100 | |
Measurements, Bin Comparator Results, Screenshots | ||
Save | External Memory: Up to 100 | |
Remote Interface | USBTMC / USB (Virtual COM), RS232, GPIB | |
Display | 4.3”, 480 × 272 LCD display | |
AC Input | 110 V ±10 % or 220 V ± 10 %, 47 to 63 Hz | |
Power Consumption | 15 VA Max. | |
Operating Temperature | 0 °C to 40 °C | |
Storage Temperature | -10 °C to 70 °C | |
Relative Humidity | up to 80 % | |
Dimension (W×H×D) | 9.25” x 4.1” x 14.17” (235 x 104 x 360 mm) | |
Weight | 7.9 lbs (3.6 kg) | |
Three-YearWarranty | ||
Included Accessories | User manual (downloadable), power cord, 4-wire kelvin clip test fixture (TLKB1), certificate of calibration & test report | |
Write Your Own Review
