We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The 603B handheld battery capacity analyzer from BK Precision tests 6 and 12 volt sealed lead acid batteries with capacities up to 100 ampere hour (Ah). Test results include voltage, state of charge, and internal resistance. This analyzer also features a built-in USB port and internal memory to store battery information, test configuration, and measurement results for up to 50 batteries.
This analyzer is a perfect choice for testing sealed lead acid batteries commonly used in intrusion detection, fire alarm, security camera, access control, industrial control and other battery backup systems.
Displayed | ||
Quick Test Mode | VO | Voltage open |
VL | Voltage loaded | |
IR | Internal resistance | |
SOC | State of charge percentage | |
RS | Resistance status, pass/fail user configured | |
Record Mode | VO | Voltage open |
VL | Voltage loaded | |
IR | Internal resistance | |
SOC | State of charge percentage | |
SOT | SOC table used for test | |
Tmp | User provided temperature | |
RS | Resistance status, pass/fail user configured | |
Recorded | ||
Data | Rec | Record number |
Dat | Date | |
Tme | Time | |
Bld | Building | |
Loc | Location | |
Typ | Type of system | |
Ser | Battery serial number | |
Mfd | Battery manufacturer or in-service date | |
Tmp | User provided temperature | |
V | Battery voltage (as labeled) | |
Ah | Battery ampere hour (as labeled) | |
VO | Voltage open | |
VL | Voltage loaded | |
RC | Remaining capacity (SOC) | |
NIR | Nominal internal resistance used for test | |
IR | Measured internal resistance | |
OCV | Open charger voltage | |
LCV | Loaded charge voltage | |
WEI | Weighting state during test, Y or N | |
SOT | SOC table used for test | |
SOV | SOC voltage used for test | |
Accuracy | ||
Voltage | 0.2% ±10 mV | |
Current | 0.2% ±10 mA | |
Resistance (IR) | 5% ±1 mΩ |
Range | ||
Open voltage | 5.5 V to 30 V | |
| Battery test | 5.5 V to 6.8 V |
Charge circuit test | 5.5 V to 8.5 V | |
| Battery test | 8 V to 14 V |
Charge circuit test | 8 V to 17 V | |
| Battery test | N/A |
Charge circuit test | 16 V to 28 V | |
Current | 1 A to 10 A | |
Resistance (IR) | 1 mΩ to 100 mΩ | |
Setting | ||
Voltage (record mode) | 6 V, 12 V | |
Ah (record mode) | 1 Ah – 100 Ah in 1 A steps | |
Current (load test mode) | 0.5 A to 10 A in 0.5 A steps | |
Time (load test mode) | 0.5 sec to 5 sec in 0.5 sec steps | |
Nominal Internal Resistance (NIR) |
| |
Temperature (record mode) | User settable | |
Real Time Clock | √ | |
Data Time Log | √ | |
Cycle Time | ≤ 5 seconds, typical | |
Battery Load current | 0.1 C based on Ah value entered by user | |
SOC tables | 2 default tables, one for 6 and one for 12 V | |
3 user configurable tables for 6 V | ||
3 user configurable tables for 12 V | ||
Battery Charger Circuit Test 6, 12 or 24 Volt Charger Circuits | Quick Test mode | Measurement data is displayed but not recorded |
Record mode | Records open and loaded charger circuit voltage | |
Pass / Fail | Optional, calculated based on user provided NIR | |
General | ||
Internal Memory | 50 records | |
Minimum Operating Voltage | 5.5 V | |
Minimum Operating Current | 0.45 A with back light on, typical | |
Display | 20 x 4 LCD with back light | |
Remote Communication | USB Cable (type B) | |
Test Leads Type | Detachable | |
Storage Temperature | -10º C to 70º C | |
Dimensions (W x H x D) | 2.91” x 10.44” x 2.28” (74 x 265.1 x 58 mm) | |
Weight | 2.65 lbs (1.2 kg) | |
Warranty | One year | |
Included Accessories | USB (type B) cable, two sets alligator test leads, adapter for testing charger circuit, test report, certificate, user manual available for download. |