Skip to the beginning of the images gallery

Bacharach Leakator 10 Combustible Gas Detector - DISCONTINUED

Be the first to review this product

SKU

0019-7051

Manufacturer:

Bacharach

Key Features:

This Product is DISCONTINUED

10 bright red LED’s and a speaker that provide visual and audible indications to the presence of gas
Three operation-status LED’s that show power on, sensor operation and low battery
Simple thumb wheel on/ off allowing for one-handed operation
Solid state plug-in sensor with typical five year life
20 inch flexible probe for hard to reach areas
Operational status LED’s in English and International systems
UL 913 Classified Class 1, Div. 1 Groups A, B, C, D

Ship to

Calculate Shipping Cost

Country

State/Province

Zip/Postal Code

Call For Price

Secured and trusted checkout with

Product Detail

Identify combustible gas leaks with Bacharach’s Leakator 10 Combustible Gas Detector.

The Leakator 10 is equipped with a flexible, long neck for leak detection in difficult to access areas. The vivid LED scale displays relative leak sizes while the manual balance function locates leaks in backgrounds where target gas is present.

The sensor has a 5 year life and an easy one hand operation. UL 913 certified for hazardous locations, Bacharach’s Leakator 10 is perfect for a variety of industrial, residential and commercial applications.

Short Description

Gases Detected	All hydrocarbons/combustible gases, including but not limited to: acetone, acetylene, benzene, butane, ethanol, gasoline, hexane, hydrogen, industrial solvents, methane, naptha, natural gas, paint thinners and propane
Sensitivity	20 ppm methane
Response Time	< 3 seconds to full scale indication
Leak Indicators	Visual (10 ultra-bright red LEDs) and audible (via internal speaker or optional earphone)
Automatic Background Adjustment	No (manual)
Power	5x C batteries
Run Time	30 hours typical (alkaline batteries)
Size (H x W x D)	Unit: 8.5 x 3.5 x 1.75 in. (21.6 x 8.9 x 4.4 cm) Probe: 20 in. (50.8 cm)
Weight	12 oz (340 g) w/out batteries
Sensor Life	5 years (typical)
Operating Conditions	23 to 130 °F (-5 to 54 °C), 10 to 85% RH (non-condensing), 1 ATM
Warm-up Time	1 minute (approximate)
Approvals	CE mark UL 913 Class 1, Division 1, Groups A, B, C & D
Warranty	1 year (including sensor)