We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Model | 8542B | 8500B | 8502B | 8510B | 8514B | |
Input ratings |
| |||||
Input voltage | 0 to 150 V | 0 to 150 V | 0 to 500 V | 0 to 120 V | 0 to 120 V | |
Input current | Low | 0 to 3 A | 0 to 3 A | 0 to 3 A | 0 to 12 A | 0 to 24 A |
High | 0 to 30 A | 0 to 30 A | 0 to 15 A | 0 to 120 A | 0 to 240 A | |
Input power | 150 W | 300 W | 300 W | 600 W | 1500 W | |
Minimum operating voltage | Low | 0.25 V at 3 A | 0.14 V at 3 A | 0.6 V at 3 A | 0.2 V at 12 A | 0.25 V at 24 A |
High | 2.5 V at 30 A | 1.4 V at 30 A | 3 V at 15 A | 2 V at 120 A | 2.5 V at 240 A | |
CV mode |
| |||||
Range | Low | 0.1 to 18 V | 0.1 to 50 V | 0.1 to 18 V | ||
High | 0.1 to 150 V | 0.1 to 500 V | 0.1 to 120 V | |||
Resolution | Low | 1 mV | ||||
High | 10 mV | |||||
Accuracy | Low | ±(0.05% + 0.02% FS) | ||||
High | ±(0.05% + 0.025% FS) | |||||
CC mode |
| |||||
Range | Low | 0 to 3 A | 0 to 3 A | 0 to 12 A | 0 to 24 A | |
High | 0 to 30 A | 0 to 15 A | 0 to 120 A | 0 to 240 A | ||
Resolution | Low | 0.1 mA | 1 mA | 1 mA | ||
High | 1 mA | 10 mA | 10 mA | |||
Accuracy | Low | ±(0.05% + 0.05% FS) | ||||
High | ±(0.05% + 0.05% FS) | |||||
CR mode |
| |||||
Range | Low | 0.05 Ω to 10 Ω | 0.3 Ω to 10 Ω | 0.05 Ω to 10 Ω | 0.05 Ω to 10 Ω | |
High | 10 Ω to 7.5 kΩ | 10 Ω to 7.5 kΩ | 10 Ω to 7.5 kΩ | 10 Ω to 7.5 kΩ | ||
Resolution | 16 bit | |||||
Accuracy | Low | 0.01% + 0.08 S (0.01% + 12.5 Ω) | ||||
High | 0.01% + 0.0008 S (0.01% + 1250 Ω) | |||||
CW mode |
| |||||
Range | 150 W | 300 W | 300 W | 600 W | 1500 W | |
Resolution | 10 mW | 10 mW | 10 mW | 10 mW | 10 MW | |
Accuracy | ±(0.2% + 0.2% FS) | ±(0.1% + 0.1% FS) | ±(0.2% + 0.2% FS) | |||
Transient mode (CC mode) |
| |||||
T1 & T2(1) | 50 µs to 3600 s/Resolution: 1 µs | 100 µs to 3600 s/Resolution: 1 µs | ||||
Accuracy | 5 µs ± 100 ppm | 10 µs ± 100 ppm | ||||
Slew rate (2) | Low | 0.0001 to 0.2 A/µs | 0.0001 to 0.2 A/µs | 0.001 to 0.2 A/µs | 0.001 to 0.3 A/µs | |
High | 0.001 to 1 A/µs | 0.001 to 0.8 A/µs | 0.001 to 0.4 A/µs | 0.01 to 0.8 A/µs |
Note: All specifications apply to the unit after a temperature stabilization time of 30 minutes over an ambient temperature range of 23 °C ± 5 °C.
(1) Fast pulse trains with large transitions may not be achievable.
(2) The slew rate specifications are not warranted but are descriptions of typical performance. The actual transition time is defined as the time for the input to change from 10% to 90%, or vice versa, of the programmed current values. In case of very large load changes, e.g. from no load to full load, the actual transition time will be larger than the expected time. The load will automatically adjust the slew rate to fit within the range (high or low) that is closest to the programmed value.
Model | 8542B | 8500B | 8502B | 8510B | 8514B | |
Readback voltage |
| |||||
Range | Low | 0 to 18 V | 0 to 50 V | 0 to 18 V | ||
High | 0 to 150 V | 0 to 500 V | 0 to 120 V | |||
Resolution | Low | 0.1 mV | 1 mV | 0.1 mV | ||
High | 1 mV | 10 mV | 1 mV | |||
Accuracy | ±(0.05% + 0.05% FS) | |||||
Readback current |
| |||||
Range | Low | 0 to 3 A | 0 to 3 A | 0 to 12 A | 0 to 24 A | |
High | 0 to 30 A | 0 to 15 A | 0 to 120 A | 0 to 240 A | ||
Resolution | Low | 0.1 mA | 1 mA | |||
High | 1 mA | 10 mA | ||||
Accuracy | ±(0.05% + 0.05% FS) | |||||
Readback power |
| |||||
Range | 150 W | 300 W | 300 W | 600 W | 1500 W | |
Resolution | 10 mW | |||||
Accuracy | ±(0.1% + 0.1% FS) | ±(0.2% + 0.2% FS) | ||||
Protection range (typical) |
| |||||
OPP | 160 W | 320 W | 320 W | 620 W | 1550 W | |
OCP | Low | 3.3 A | 3.3 A | 13 A | 26.7 A | |
High | 33 A | 16 A | 130 A | 267 A | ||
OVP | 160 V | 530 V | 125 V | 125 V | ||
OTP | 185 °F (85 °C) | 203 °F (95 °C) | 185 ºF (85 ºC) | |||
Short circuit (typical) |
| |||||
Current (CC) | Low | 3.3 A | 3.3 A | 3.3 A | 13 A | 26.7 A |
High | 33 A | 33 A | 16 A | 130 A | 267 A | |
Voltage (CV) | 0 V | |||||
Resistance (CR) | 80 mΩ | 40 mΩ | 180 mΩ | 15 mΩ | 8 mΩ | |
General |
| |||||
Input terminal impedance (typical) | 150 kΩ | 1 MΩ | 150 kΩ | |||
AC input | 110 V/220 V ±10%, 50/60 Hz | |||||
I/O Interface | DB9 (TTL) with TTL to USB serial adapter | USB, RS232 | ||||
Temperature | Operating | 32 °F to 104 °F (0 °C to 40 °C) | ||||
Storage | 14 °F to 140 °F (-10 °C to 60 °C) | |||||
Humidity | Indoor use, ≤ 95 % | |||||
Safety | EN 61010-1:2010, Low Voltage Directive (LVD) 2014/35/EU | |||||
Electromagnetic compatibility | EN61326-1:2013, CISPR 11, EN 61000-3-2:2014, EN61000-3-3:2013, EMC Directive 2014/30/EU | |||||
Dimensions (W x H x D) | 8.5” x 3.5” x 14” (214.5 x 88.2 x 354.6 mm) | 8.5” x 3.5” x 18.5” (214.5 x 88.2 x 470 mm) | 17.2” x 3.5” x 18.5” (436.5 x 88.2 x 470 mm) | |||
Weight | 10.3 lbs (4.7 kg) | 15.8 lbs (7.2 kg) | 45 lbs (20.5 kg) | |||
Warranty | 3 years | |||||
Standard accessories | Power cord, USB cable, certificate of calibration, USB to TTL serial converter IT-E132B(3), rack-mount ears(4) | |||||
Optional accessories | TLPWRI high current test leads, IT-E151 rackmount kit |
(3) Standard for 8542B, 8500B, 8502B, and 8510B models only. (4) Standard for 8514B only.
- Performance verification of photovoltaic solar panels
- CR-LED mode to simulate loading behavior and test LED drivers
- Fuel and solar cell tests
- Battery test and power supply evaluations