We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
BK Precision 4017A ranges are 0.1Hz-10MHz
Specifications | 4017A | 4040A |
Frequency Characteristics | ||
Waveforms | Sine, Square, Triangle, ±Pulse, ±Ramp | |
Range | 0.1 Hz to 10 MHz in 8 ranges | 0.2 Hz to 20 MHz in 8 ranges |
Resolution | 5 digits | 5 digits |
Tuning Range | 10:1 | 10:1 |
Fine | ±5% of coarse setting | ±5% of coarse setting |
Variable Duty Cycle | 15:85:15 cont variable | 15:85:15 cont variable |
Operating Modes | Normal, sweep, VCG | Normal,sweep, VCG, AM, FM,burst |
Output Characteristics | ||
Impedance | 50Ω ±10% | |
Level | 20 V p-p Open circuit, 10V p-p into 50Ω | |
Amplitude | Variable, 20 dB range typical | |
Attenuation | -20 dB ±1dB | |
DC Offset | Preset ±0.1 V typ Variable: ±10V open-circuit ±5 into 50Ω | |
Sine Wave | ||
Distortion | ≤ 3% typical at 1 kHz | |
Flatness | ±5% (.45 dB) 0.1 Hz to 8 MHz ±20% (2.0 dB) 8 MHz to 10 MHz | ±5% (.45 dB) 10 Hz to 8 MHz ±20% (2.0 dB) 8 MHz to 20 MHz |
Square wave | ||
Symmetry | 0.1 Hz to 100 kHz <2% | 0.2 Hz to 100 kHz <2% |
Rise time | ≤ 30 ns | |
Triangle Wave | Linearity: ≥ 98% to 100 kHz | |
TTL Output | ||
Level | 0.8V to 2.4V | |
Rise time | ≤ 20 nS | |
Duty Cycle | 50% typical | |
CMOS Output | ||
Max. Frequency | 2 MHz | |
Level | 4V to 14V ±0.5 p-p cont. variable | |
Rise Time | ≤ 120 nS | |
VCG (Voltage controlled generator) | ||
Input Voltage | 0-10V ±1V causes a 100:1 frequency change | |
Impedance | 10kΩ ±5% | |
Sweep Operation | ||
Mode | LIN/LOG | |
Width | 100:1 continuously variable | |
Rate | 0.5 s to 30 s cont variable | 20 ms to 2 s cont variable |
Sweep Output | 0 to 10 V | 0 to 2 V |
Start/Stop Frequencies | NA | Adjustable |
Frequency Counter | ||
Accuracy | Time base accuracy ±1 count | |
Time Base Accuracy | ±10 ppm (23° ±5°C) | |
Display | 5 digit LED | |
Mode | NA | INT or EXT |
External Input | ||
Frequency | Does not apply | 5 Hz to 30 MHz |
Resolution | Does not apply | 0.1, 1, 10, 100, 1 kHz |
Sensitivity | Does not apply | 25 mVrms |
General | ||
Power Source | 120/230 VAC ±10%, 50/60 Hz, internal jumper selectable | |
Dimensions | 4.5 x 11.75 x 10.575" (140 x 298 x 264mm) | 5.5 x 11.75 x 10.575" (114 x 298 x 264mm) |
Weight | 4 lbs. (1.8 kg) | 4.5 lbs. (2 kg) |
Two Year Warranty | ||
Supplied Accessories | Output Cable with BNC to Alligator Clips, Instruction Manual Carrying Case (not included): LC-40 | |
Write Your Own Review