We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Specifications | 4007B | 4013B |
Frequency Characteristics | ||
Sine | 0.1 Hz to 7 MHz | 0.1 Hz to 12 MHz |
Square | 0.1 Hz to 7 MHz | 0.1 Hz to 12 MHz |
Triangle | 0.1 Hz to 1 MHz | |
Resolution | 5 digits or 100 mHz | |
Accuracy | 0.01% ± 0.186 Hz | |
Output Characteristics | ||
Amplitude Range | 20 mVpp to 20 Vpp (open circuit); 10 mVpp to 10 Vpp (into 50 Ω) | |
Amplitude Resolution | 3 digits (1,000 counts) | |
Amplitude Accuracy | ± 2 % ± 20 mV of programmed output from 1.01 V – 10 V | |
Flatness | ± 1 dB to 7 MHz | ± 1 dB to 12 MHz |
DC Offset Range | -4.5 V to 4.5 V (into 50 Ω)* | |
DC Offset Resolution | 10 mV, 3 digits | |
DC Offset Accuracy | ± 2 % ± 10 mV (into 50 Ω) | |
Output Impedance | 50 Ω ± 2% | |
Output Protection | Protected against short circuit or accidental overvoltage practically available in electronic laboratories, applied to the main output connector | |
Waveform Characteristics | ||
Harmonic Distortion (at 10 Vp-p into 50 Ω) | DC - 100 kHz, -55 dBc 100 kHz - 1 MHz, < -45 dBc 1 MHz – 7 MHz, <-30 dBc | DC - 100 kHz, -55 dBc 100 kHz - 1 MHz, < -45 dBc 1 MHz – 12 MHz, <-30 dBc |
Square Rise/Fall Time | ≤ 20 ns (10% to 90% at full amplitude into 50 Ω) | |
Duty Cycle | Adjustable 20% - 80% up to 1 MHz for square and triangle | |
Symmetry Accuracy at 50% | ± 1% | |
Sweep Characteristics | ||
Sweep Shape | Linear or Logarithmic, up or down | |
Sweep Time | 20 ms to 100 s | |
Input and Output | ||
Sync Out | TTL pulse at programmed frequency; 50 Ω source impedance | |
General | ||
Memory Storage | 9 instrument settings | |
Power Requirements | 100 V – 240 V AC ± 10% | |
Operating Temperature | 0 °C to 50 °C (32 °F to 122 °F) | |
Storage Temperature | -10 °C to 70 °C (14 °F to 158 °F) | |
Humidity | 95% R.H. 0 °C to 30 °C | |
Dimensions (W x H x D) | 8.39” x 3.46” x 8.27” (213 x 88 x 210 mm) | |
Weight | 4.4 lbs (2 kg) | |
Electromagnetic Compatibility | Meets EMC Directive 2004/108/EC, EN55011, EN55082 | |
Safety | Meets Low Voltage Directive 2006/95/EC, EN61010 | |
Three Year Warranty | ||
Supplied Accessories | Manual on CD, power cord, certificate of calibration |
*Depending on the amplitude setting
Note: All specifications apply to the unit after a temperature stabilization time of 15 minutes over an ambient temperature range of 23 ºC ± 5 ºC. Specifications are subject to change without notice.