Skip to the beginning of the images gallery

Amprobe AT-6010/KIT Wire Tracer Kit with Digital Multimeter

Be the first to review this product

SKU

AT-6010/KIT

Manufacturer:

Amprobe

Key Features:

Amprobe AT-6010 Advanced Wire Tracer Kit

Traces wires in walls, ceilings, floors and corners
Locates breakers and fuses
Pinpoints shorts and opens
High resolution 2.5″” TFT LCD black & white display
Simple one button Transmitter operation
Two Transmitter signal modes
1. “High Signal” mode for normal circuits
2. “Loop” mode for closed loop de-energized circuits
Two automatically selected frequency modes for reliable tracing on energized and de-energized circuits
Comes with custom Amprobe soft carrying case, test leads and accessories
Rated CAT III 600 V for work directly on an energized circuit without the need to take equipment offline
Compatible with optional Signal Clamp (CT-400) clamp-on attachment

Amprobe AM-530 True-RMS Electrical Contractor Multimeter

True-rms technology improves accuracy in electrically noisy environments
Measures AC/DC voltage up to 600V, AC/DC current, resistance, frequency, capacitance, and temperature
Non-contact voltage detection enhances safety
Audible continuity quickly identifies shorts and opens
Diode test to verify diode polarity
Data hold freezes the reading on the display for further analysis
MIN/MAX recording records min/max measurements over time to show voltage fluctuations
Relative zero mode displays the difference between the actual reading and a stored reference value and may be used with any function or range
Combines user friendly features such as, auto power-off to conserve battery life, low battery warning, a “third hand test probe holder, built-in test leads storage, a built-in flashlight, and a Velcro strap to hang the meter
Auto and manual-ranging delivers maximum flexibility
Backlit LCD display with analog bar graph makes it easy to view results
CAT III 600V safety rated

Ship to

Calculate Shipping Cost

Country

State/Province

Zip/Postal Code

Qty

$1,002.99

Secured and trusted checkout with

Product Detail

Amprobe’s AT-6010/Kit Wire Tracer Kit with Digital Multimeter is the perfect residential and commercial electrical maintenance kit. Made for inspection and verification of indoor electrical installations, the AT-6010/KIT comes with the top selling AT-6010 Wire Tracer and the AM-530 True-rms Electrical Contractor Multimeter. Users can troubleshoot voltage, perform repairs, run new wiring, check continuity, trace and locate wires and breakers and identify wire shorts rapidly and accurately. The AT-6010/KIT is the essential product bundle for professional electricians operating in demanding indoors environments.

Short Description

Amprobe AT-6010 Advanced Wire Tracer Kit

Features	AT-6010-R Receiver	AT-6010-T Transmitter
Measurement category	CAT III 600 V
Operating voltage/current	0 to 600 V
Operating frequency	Energized: 6.25 kHz
Hazardous voltage detection	N/A	> 30 V AC/DC
Signal indications	Numeric bar graph display and audible beep	LEDs
Response time	Tip Sensor (Energized/De-energized): 500 ms Battery voltage monitoring: 5 sec	Line voltage monitoring: 1 sec Battery voltage monitoring: 5 sec
Current output of signal (typical)	N/A	Energized circuit: HI mode: 60 mA RMS De-energized circuit: HI mode: 130 mA RMS Loop mode: 160 mA RMS
Signal voltage output (nominal)	N/A	De-energized circuit: HIGH: 33 V RMS, 140 Vp-p With CT-400: Loop model: 31 V RMS, 120 Vp-p
Range detection (open air)	Tip Sensor (Energized): Max distance via air: up to 20 ft (6.1 m) Pinpointing: approx. 1.97 in (5 cm) Tip Sensor (De-energized): Max distance via air: up to 14.7 ft (4.5 m) Pinpointing: approx. 1.97 in (5 cm)	N/A
Display size	LCD 2.5 in (6.35 cm)	N/A
Display dimensions (W x H)	1.45 x 1.93 in (36.72 x 48.96 mm)	N/A
Display type	Segment LCD	LEDs
Display color	Black and white	Operating mode LEDs: red Battery status LED: red
Booting time	< 3 sec	< 2 sec
Backlight	Yes	N/A
Operating temperature	-4 °F to 122 °F (-20 °C to 50 °C)
Operating humidity	45%: -4 °F to <50 °F (-20 °C to <10 °C) 95%: 50 °F to <86 °F (10 °C to <30 °C) 75%: 86 °F to <104 °F (30 °C to <40 °C) 45%: 104 °F to 122 °F (40 °C to 50 °C)
Storage temperature and humidity	-4 °F to 158 °F (-20 °C to 70 °C), <95% RH
Operating altitude	0 to 6561 ft (2000 m)
Transient protection	N/A	6.00 kV (1.2/50μS surge)
Pollution degree	2
IP rating	IP 52	IP 40
Drop test	3.28 ft (1 m)
Power supply	4 x AA (alkaline)	8 x AA (alkaline)
Power consumption (typical)	70 mA	Hi mode: 70 mA Loop mode with Clamp: 90 mA Consumption without signal transmission: 10 mA
Battery life	Approx. 25 h	Hi mode: approx. 25 h Loop mode: approx. 18 h
Low battery indication	Yes
Fuse	N/A	1.6 A, 700 V, fast-acting, Ø 6x32mm
Dimensions (L x W x H)	Approx. 7.2 x 2.95 x 1.69 in (183 x 75 x 43 mm)	Approx. 7.2 x 3.66 x 1.97 in (183 x 93 x 50 mm)
Weight	Approx. 0.6 lb (0.27 kg)	Approx. 1.25 lb (0.57 kg)
Certifications

Amprobe AM-530 True-RMS Electrical Contractor Multimeter

FEATURE	AM-530	Best Accuracy
True-rms	X
AC Voltage	400 mV, 4.000 V, 40.00 V, 400.0 V, 600 V	+/- (1.0 % rdg + 3 LSD) @ 45 Hz to 400 Hz, 4 V to 400 V ranges
DC Voltage	400 mV, 4.000 V, 40.00 V, 400.0 V, 600 V	+/- (0.8% rdg + 1 LSD) @ 4 V to 400 V ranges
AC Current	400.0 μA, 4000 μA, 40.00 mA, 400.0 mA, 4.000 A, 10.00 A	+/- (1.2% rdg + 3 LSD) @ 400 μA to 400 mA ranges, 45 Hz to 400 Hz
DC Current	400.0 μA, 4000 μA, 40.00 mA, 400.0 mA, 4.000 A, 10.00 A	+/- (1.0% rdg + 2 LSD) @ 400 μA to 400 mA ranges
Frequency	10 Hz to 10 MHz	+/- (0.1% rdg + 4 LSD)
Resistance	400.0 Ω, 4.000 kΩ, 40.00 kΩ, 400.0 kΩ, 4.000 MΩ, 40.00 MΩ	+/- (1.0% rdg + 2 LSD) @ 4 kΩ to 400 kΩ ranges
Capacitance	40.00 nF, 400.0 nF, 4.000 μF, 40.00 μF, 400.0 μF, 4000 μF	+/- (3.0% rdg + 5 LSD) @ 400 nF to 40 μF ranges
Temperature	-40 ⁰F to 1832 ⁰F -40 ⁰C to 1000 ⁰C	+/- (1.8% rdg + 6 ⁰F) @ >32 ⁰F to 212 ⁰F +/- (1.2% rdg + 3 ⁰C) @ >0 ⁰C to 100 ⁰C
Number of temperature inputs	Single Thermocouple