We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The Model SL261 is a portable 100A peak current probe with insulated BNC output cable that can accurately measure AC or DC current waveforms. The unit has proportional mV output for direct readings on oscilloscopes. Three position slide switch on handle selects ranges and ON/OFF.
ELECTRICAL
Model | Measurement Range | Compatibility |
SL261 | 100mV/A: 100mA to 10A peak 10mV/A: 1 to 100A peak | 8333, 8336, 8435 and PEL |
Battery: 9V Alkaline NEDA 1604A, 6LR61
Battery Life: SL261 - 55H typical
NOTE: Battery life is twice the typical value when using Lithium batteries
ENVIRONMENTAL
Indoor use.
Operating Temperature: 14° to 131°F (-10° to 55°C); 10% to 85% RH
Storage Temperature: -40° to 158°F (-40° to 70°C); 10% to 90% RH
Degree of pollution: 2
Altitude: < 2000 m
MECHANICAL
Model | Lead Length (nominal) | Clamping Diameter | Dimensions | Weight |
SL261 | 6.5 ft (1.9m) | 0.46" (11.8mm) | 9.09 x 1.42 x 2.64" (231 x 36 x 67mm) | 11.6 oz (330g) |
SAFETY
Protection index IP 40 for the probes and IP 30 jaws open, according to IEC 60 529
■ IP 65 for the AmpFlex® according to IEC 60 529
■ IK 04 according to IEC 50102
Drop test: According to IEC 61010-1
Electrical safety according to IEC 61010-2-032.
Maximum applicable voltage:
SL261: 600V CAT III
Manuals
Write Your Own Review