We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
AEMC’s LM102 general-purpose AC current probe is constructed for power analyzers, DMMs and other measuring instruments with current input. It is equipped with a 1000:1 ratio and an output of 1mA per Amp. AEMC has designed the LM102 with integral 5 ft (1.5m) leads terminated by safety 4mm banana plugs. The LM102 also has protective diodes across the output that restrict the voltage in open secondary situations.
| Maximum Conductor Size | .63" (16mm) |
| Current Range | 200Arms AC |
| Measurement Range | 0.05 to 350A |
| Output Signal | 1mA/A AC (200mA @ 200A) |
| Transformation Ratio | 1000:1 |
| Output | 5 ft (1.5m) lead with 4mm safety banana plug |
| Accuracy 50/60Hz | 1.5% ± 0.02A |
| Frequency Range | 48Hz to 10kHz |
| Phase Shift at 50Hz | 3° max |
| Open Secondary Voltage | <30V |
| Load Impedance | 1Ω, 10Ω max |
| Overload | 350A continuously up to 1kHz |
| Dimensions (HxWxD) | 5.12 x 1.81 x 1.34” (130.4 x 46 x 34mm) |
| Weight | 8.8 oz (250g) |
| Operating Temperature | 14° to +122°F (-10° to +50°C) |
| Storage Temperature | -40° to +176°F (-40° to +80°C) |
| Operating Humidity | 85% RH |
| Pollution Degree | 2 |
| Ingress Protection (lP) | IP40 |
| EMC | EN 61326-1 |
| Safety Compliance | EN/IEC 61010-2-32, 600V CAT III |
Write Your Own Review
- Measuring in breaker panels
- Industrial loads
- HVAC
- Residential and commercial sites
- Data logging/recording
- General AC current measurements
- Power measurement applications
