AEMC L261 AC Voltage Logger

SKU
2126.05
Manufacturer:
AEMC
AEMC

Key Features:

  • TRMS voltage recording up to 600VAC/DC
  • 64 samples per cycle
  • Programmable storage rates from 8 every second to 1 per day
  • 3 user selectable storage modes
  • Stores up to 240,000 measurements in non-volatile memory
  • Powered by standard Alkaline batteries
  • Lightweight, compact, fits anywhere
  • 5 LED indicators quickly and clearly display Logger status
  • Includes DataView® software for data storage, real-time waveform display, analysis and report generation
  • Isolated USB communication
  • 300V CAT IV; 600V CAT III
$519.00

Secured and trusted checkout with

The Simple Logger II Model L261 is a one channel recording device powered by two alkaline batteries. Line tracking is performed such that 64 samples over one line cycle are taken. Frequency tracking is performed over the range of 2Hz around the nominal line frequency (50 or 60Hz). Harmonic measurements are calculated from these 64 samples (Harmonics are only available from the Simple Logger II Control Panel within the DataView software). The Simple Logger II records TRMS at a rate of up to eight times per second. The measurement process is performed no more than eight times per second. TRMS calculations are performed on a single line cycle. This means that the input(s) are ignored between measurement intervals. The main advantage of the logger is its ability to perform a variety of recording tasks with easy and intuitive setup from a computer using DataView software. Analog information on the input is sampled and converted to a digital signal. This digital signal is processed and stored along with scale and time information. An optically isolated Universal Serial Bus (USB) port provides for the transfer of data from the instruments internal memory to the computer for analysis.

MODELS

L261

L481

ELECTRICAL

Channels

One

Input Connection

Two recessed 4mm safety banana jacks

Measurement Range

0 to 600Vac/dc

-850 to ±850Vdc

Resolution

0.1V

Accuracy (50/60Hz)

0 to 5V: unspecified

5 to 50V:

± (0.5% of Reading + 1V)

50 to 600V:

± (0.5% of Reading + 0.5V)

0 to 5V: unspecified

5 to 50V:

± (0.5% of Reading + 1V)

50 to 850V:

± (0.5% of Reading + 0.5V)

Input Impedance

40MΩ

Sample Rate

64 samples/cycle

Maximum of 8 per second

Storage Rate

Programmable from 8 every second to 1 every day

Storage Modes

Start/Stop, FIFO, Extended  Recording  Mode  (XRM™) and Alarm

Recording Length

15 minutes to 8 weeks, programmable using DataView®

Memory

240,000  measurements (512KB)

The recorded data is stored in non-volatile memory and

will be retained even if the battery is low or removed.

Communication

USB 2.0 optically isolated

Power Source

2 x 1.5V AA-cell Alkaline batteries (included)

Battery Life

100 hours to >45 days

(dependent on sample rate and recording length)

MECHANICAL

Dimensions

4.94 x 2.75 x 1.28" (125 x 70 x 32mm)

Weight (with battery)

6.4 oz (181g)

Case

UL94-V0

Vibration

IEC 68-2-6 (1.5mm, 10 to 55Hz)

Shock

IEC 68-2-27 (30G)

Drop

IEC 68-2-32  (1m)

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
  • Surge and Sag recording
  • Long term supply monitoring
  • Industrial, commercial, residential monitoring
  • Monitor voltage harmonics
  • Find intermittent voltage problems
  • Machine monitoring