We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
The AEMC 1110 (2121.71) is portable, easy-to-use, and has the ability to perform a variety of recording tasks with easy and intuitive setup from a computer using supplied DataView® software. The 1110 provides selectable lux or footcandle units for display and features a blue luminescent backlit display, MIN/MAX/AVG and HOLD functions.
Channel | One with LCD display and Backlight | |
Input | Detachable silicon (Si) sensor Class C Lightmeter per NF C 42-710 | |
Accuracy | ±3% of R on incandescent sources (default mode) ±6% of R on LEDs (3000K to 6000K) ±9% of R on florescent sources | |
Accuracy with compensation | LED mode: ±4% of R (at 4000K) Flou mode: ±4% of R (type F11, 4000K) | |
Resolution | 0.1lux from 0.1 to 999.9lx 1lx from 1000 to 9.999lx 10lx from 10.00klux to 99.99klx 100lx beyond | 0.01fc from 0.01 to 99.99fc 0.1fc from 100.0 to 999.9fc 1fc from 1.000 to 9.999fc 10fc beyond |
Recording | Manual start/stop on the product Short press for MEM: spot recording/long press for REC at the define default rate Programed recording: start date, recording interval, and end date defined using DataView® software | |
Other functions | MIN-AVG-MAX-HOLD | |
Sampling Rate | Programmable from 1s, 2s, 5s, 10s, 20s, 30s, 2min, 5min, 10min, 15min, 30min, and 1hr | |
MAP mode | The MAP mode can be used to map the lighting on a surface of a room. In this case the measurements are saved in the same file | |
Memory | 1,000,000 measurements on each channel (4MB). Recorded data is stored in non-volatile memory and will be retained even if battery is low or removed. | |
Communication | USB 2.0 and Bluetooth | |
Power Source | 3x1.5V AA(LR6) alkaline batteries or USB port (micro-USB adaptor offered as an accessory) | |
Battery Life | 500 hrs., 3 years with 15 minute intervals | |
Dimensions: Case Sensor | 5.9 x 2.84 x 1.28" (150 x 72 x 32mm) 2.64 x 2.52 x 1.38" (67 x 64 x 35mm) | |
Weight (with battery) | 12.2oz (345g) with batteries | |
Case | Polycarbonate | |
Operating Temperature | 14° to 140° F (-10° to 60°C) | |
Storage Temperature | -4° to 140° F (-20° to 60°C) | |
Relative Humidity | Up to 90% | |
Ingress Protection (IP) | IP50 with USB connector closed and protective cap on the sensor | |
EMC | EN 61326-1 | |
Safety Compliance | IEC 61010-1 | |
Warranty | 2 years |
Write Your Own Review